Specification sheet Wheel Loader Ref komatsu-wa65pt-3-wheel-loader
Komatsu WA65PT-3
The Komatsu WA65PT-3 is a wheel loader with an operating weight of 9,391.7 lb (4,260 kg), a 50 hp engine, and a 0.92 yd³ (0.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,391.7lb
4,260kg
Engine power
50hp
37kW
Net Power Bucket capacity
0.92yd³
0.7m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WA65PT-3 sits below the median for its class:
- Operating weight 9,390 lb lighter than 79% (n=374)
- Engine power 50 hp less powerful than 80% (n=367)
- Bucket capacity 0.9 yd³ smaller-bucket than 84% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | 4D 94E | |
| Net Power | 50hp | 37kw |
| Max Torque | 121.7lb ft | 165Nm |
| Displacement | 169.4cu in | 2.8L |
| Torque Measured @ | 1600rpm |
02 Operational Specification
| Operating Weight | 9391.7lb | 4260kg |
|---|---|---|
| Fuel Capacity | 20.4gal | 77L |
| Hydraulic System Fluid Capacity | 18.5gal | 70L |
| Engine Oil Fluid Capacity | 2.5gal | 9.4L |
| Cooling System Fluid Capacity | 2.7gal | 10L |
| Front Axle/Diff Fluid Capacity | 1.7gal | 6.1L |
| Rear Axle/Diff Fluid Capacity | 1.8gal | 6.5L |
| Static Tipping Weight | 7462.7lb | 3385kg |
| Turning Radius | 12.2ft in | 3700mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 365/70 R18 SPT 9 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2900.8psi | 20000kPa |
|---|---|---|
| Pump Flow Capacity | 14gal/min | 55L/min |
| Raise Time | 5sec | |
| Dump Time | 1sec | |
| Lower Time | 2.4sec | |
| Pump Type | Closed Hydraulic System |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.22ft in | 2505mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.92yd3 | 0.7m3 |
| Bucket Width | 6.07ft in | 1850mm |
| Breakout Force | 9059.8lb | 40.3kN |
06 Dimensions Dimensions
| Ground Clearance | 0.96ft in | 290mm |
|---|---|---|
| Length With Bucket On Ground | 16.79ft in | 5115mm |
| Height To Top Of Cab | 9.57ft in | 2915mm |
| Wheelbase | 6.4ft in | 1950mm |
| Hinge Pin - Max Height | 10.22ft in | 3115mm |
| Reach At Max Lift And Dump | 2.56ft in | 780mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.