Specification sheet Wheel Loader Ref komatsu-wa65-6-wheel-loader
Komatsu WA65-6
The Komatsu WA65-6 is a wheel loader with an operating weight of 10,273.55 lb (4,660 kg), a 53.7 hp engine, and a 0.92 yd³ (0.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,273.55lb
4,660kg
Engine power
53.7hp
40kW
Net Power Bucket capacity
0.92yd³
0.7m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WA65-6 sits below the median for its class:
- Operating weight 10,270 lb lighter than 71% (n=374)
- Engine power 54 hp less powerful than 75% (n=367)
- Bucket capacity 0.9 yd³ smaller-bucket than 84% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | 4D95LWE-5 | |
| Net Power | 53.7hp | 40kw |
| Power Measured @ | 2350rpm | |
| Max Torque | 140.2lb ft | 190Nm |
| Displacement | 201.4cu in | 3.3L |
| Torque Measured @ | 1600rpm |
02 Operational Specification
| Operating Weight | 10273.6lb | 4660kg |
|---|---|---|
| Fuel Capacity | 34.9gal | 132L |
| Hydraulic System Fluid Capacity | 13.3gal | 50L |
| Engine Oil Fluid Capacity | 2gal | 7.5L |
| Cooling System Fluid Capacity | 2.5gal | 9.1L |
| Front Axle/Diff Fluid Capacity | 2.3gal | 8.4L |
| Rear Axle/Diff Fluid Capacity | 2.3gal | 8.4L |
| Static Tipping Weight | 8046.9lb | 3650kg |
| Turning Radius | 13.5ft in | 4095mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps | |
| Rear Axle Oscillation | 10degrees | |
| Tire Size | 12.0-18 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2900.8psi | 20000kPa |
|---|---|---|
| Pump Flow Capacity | 14.1gal/min | 53L/min |
| Raise Time | 5.3sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.98ft in | 2430mm |
|---|---|---|
| Bucket Width | 5.45ft in | 1660mm |
| Bucket Capacity - Heaped | 0.92yd3 | 0.7m3 |
06 Dimensions Dimensions
| Ground Clearance | 0.92ft in | 280mm |
|---|---|---|
| Length With Bucket On Ground | 17.8ft in | 5425mm |
| Width Over Tires | 5.34ft in | 1625mm |
| Height To Top Of Cab | 8.04ft in | 2450mm |
| Wheelbase | 6.73ft in | 2050mm |
| Hinge Pin - Max Height | 10.22ft in | 3115mm |
| Reach At Max Lift And Dump | 3.17ft in | 965mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.