Specification sheet Wheel Loader Ref komatsu-wa65-5-wheel-loader
Komatsu WA65-5
The Komatsu WA65-5 is a wheel loader with an operating weight of 10,274 lb (4,660 kg), a 54 hp engine, and a 0.92 yd³ (0.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,274lb
4,660kg
Engine power
54hp
40kW
Net Power Bucket capacity
0.92yd³
0.7m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WA65-5 sits below the median for its class:
- Operating weight 10,270 lb lighter than 71% (n=374)
- Engine power 54 hp less powerful than 75% (n=367)
- Bucket capacity 0.9 yd³ smaller-bucket than 84% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | 4D95-LE3 | |
| Net Power | 54hp | 40kw |
| Power Measured @ | 2350rpm | |
| Displacement | 201cu in | 3.3L |
| Aspiration | Natural |
02 Operational Specification
| Operating Weight | 10274lb | 4660kg |
|---|---|---|
| Fuel Capacity | 21.4gal | 81L |
| Hydraulic System Fluid Capacity | 7.9gal | 30L |
| Engine Oil Fluid Capacity | 2gal | 7.5L |
| Cooling System Fluid Capacity | 2.4gal | 9.1L |
| Front Axle/Diff Fluid Capacity | 2.2gal | 8.4L |
| Rear Axle/Diff Fluid Capacity | 2.2gal | 8.4L |
| Static Tipping Weight | 7848lb | 3560kg |
| Turning Radius | 13.5ft in | 4095mm |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.4mph | 20km/h |
| Max Speed - Reverse | 12.4mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2900psi | -- |
|---|---|---|
| Raise Time | 5sec | |
| Dump Time | 0.9sec | |
| Lower Time | 3.4sec | |
| Pump Type | Open hydraulic system |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.25ft in | 2530mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.92yd3 | 0.7m3 |
| Bucket Width | 5.42ft in | 1660mm |
| Breakout Force | 8162lb | 3710kN |
06 Dimensions Dimensions
| Ground Clearance | 0.92ft in | 280mm |
|---|---|---|
| Length With Bucket On Ground | 17.5ft in | 5350mm |
| Width Over Tires | 5.33ft in | 1625mm |
| Height To Top Of Cab | 8ft in | 2450mm |
| Wheelbase | 6.67ft in | 2050mm |
| Hinge Pin - Max Height | 10.17ft in | 3115mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.