Specification sheet Wheel Loader Ref komatsu-wa500-3l-wheel-loader
Komatsu WA500-3L
The Komatsu WA500-3L is a wheel loader with an operating weight of 64,970.2 lb (29,469.99 kg), and a 315 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
64,970.2lb
29,469.99kg
Engine power
315hp
234.9kW
Gross Power ◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Komatsu WA500-3L sits above the median for its class:
- Operating weight 64,970 lb heavier than 79% (n=198)
- Engine power 315 hp more powerful than 74% (n=190)
Not positioned on bucket capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | SAD140E | |
| Gross Power | 315hp | 234.9kw |
| Power Measured @ | 2100rpm | |
| Displacement | 927.6cu in | 15.3L |
| Aspiration | TURBOCHARGED |
02 Operational Specification
| Operating Weight | 64970.2lb | 29470kg |
|---|---|---|
| Fuel Capacity | 121.5gal | 460L |
| Hydraulic System Fluid Capacity | 46.2gal | 174.9L |
| Engine Oil Fluid Capacity | 9.8gal | 37.1L |
| Cooling System Fluid Capacity | 26.2gal | 99.2L |
| Transmission Fluid Capacity | 16.4gal | 62.1L |
| Front Axle/Diff Fluid Capacity | 20.6gal | 78L |
| Rear Axle/Diff Fluid Capacity | 20.6gal | 78L |
| Static Tipping Weight | 51588.2lb | 23400.1kg |
| Turning Radius | 21.4ft in | 6522.8mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 25-26.5 |
03 Transmission Specification
| Transmission Type | POWERSHIFT | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 20.5mph | 33km/h |
| Max Speed - Reverse | 22.4mph | 36.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3045.8psi | 21000.1kPa |
|---|---|---|
| Pump Flow Capacity | 91.9gal/min | 347.9L/min |
| Raise Time | 6.4sec | |
| Dump Time | 1.7sec | |
| Lower Time | 3.5sec | |
| Pump Type | GEAR PUMP |
05 Dimensions Dimensions
| Ground Clearance | 1.5ft in | 457.2mm |
|---|---|---|
| Length With Bucket On Ground | 30.2ft in | 9204.96mm |
| Width Over Tires | 10.5ft in | 3200.4mm |
| Height To Top Of Cab | 12.7ft in | 3870.96mm |
| Wheelbase | 11.8ft in | 3596.64mm |
| Hinge Pin - Max Height | 14.8ft in | 4511.04mm |
| Reach At Max Lift And Dump | 4.3ft in | 1310.65mm |
?Questions & answersfrom this machine's data
- How much does a Komatsu WA500-3L wheel loader weigh?
- A Komatsu WA500-3L wheel loader has an operating weight of 64,970.2 lb (29,470 kg).
- What engine does a Komatsu WA500-3L wheel loader have?
- A Komatsu WA500-3L wheel loader is powered by a SAD140E engine producing 315 hp (234.9 kW).
- How much fuel does a Komatsu WA500-3L wheel loader hold?
- A Komatsu WA500-3L wheel loader has a fuel capacity of 121.5 gal (460 L).
- What is the ground clearance of a Komatsu WA500-3L wheel loader?
- A Komatsu WA500-3L wheel loader has a ground clearance of 1.5 ft (457.2 mm).
- How long is a Komatsu WA500-3L wheel loader?
- A Komatsu WA500-3L wheel loader has an overall length of 30.2 ft (9,205 mm) with the bucket on the ground.
- How fast does a Komatsu WA500-3L wheel loader travel?
- A Komatsu WA500-3L wheel loader has a maximum forward travel speed of 20.5 mph (33 km/h).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.