Specification sheet Wheel Loader Ref komatsu-wa50-6-wheel-loader
Komatsu WA50-6
The Komatsu WA50-6 is a wheel loader with an operating weight of 8,432.69 lb (3,825 kg), a 38.6 hp engine, and a 0.79 yd³ (0.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,432.69lb
3,825kg
Engine power
38.6hp
28.8kW
Net Power Bucket capacity
0.79yd³
0.6m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WA50-6 sits below the median for its class:
- Operating weight 8,430 lb lighter than 85% (n=374)
- Engine power 39 hp less powerful than 91% (n=367)
- Bucket capacity 0.8 yd³ smaller-bucket than 89% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | 4D88E-6B | |
| Net Power | 38.6hp | 28.8kw |
| Gross Power | 39.8hp | 29.7kw |
| Power Measured @ | 2400rpm | |
| Displacement | 135cu in | 2.3L |
02 Operational Specification
| Operating Weight | 8432.7lb | 3825kg |
|---|---|---|
| Fuel Capacity | 13.3gal | 50L |
| Hydraulic System Fluid Capacity | 11.1gal | 42L |
| Engine Oil Fluid Capacity | 2gal | 7.5L |
| Cooling System Fluid Capacity | 1.9gal | 7L |
| Front Axle/Diff Fluid Capacity | 1.3gal | 4.8L |
| Rear Axle/Diff Fluid Capacity | 1.2gal | 4.5L |
| Static Tipping Weight | 5688lb | 2580kg |
| Turning Radius | 12.6ft in | 3825mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps | |
| Rear Axle Oscillation | 14degrees | |
| Tire Size | 15.5/60-18 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 1 | |
| Number Of Reverse Gears | 1 | |
| Max Speed - Forward | 9.4mph | 15km/h |
| Max Speed - Reverse | 9.4mph | 15km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 12.3gal/min | 46.5L/min |
| Raise Time | 5.7sec | |
| Dump Time | 1sec | |
| Lower Time | 3.5sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.13ft in | 2475mm |
|---|---|---|
| Bucket Width | 5.55ft in | 1690mm |
| Bucket Capacity - Heaped | 0.79yd3 | 0.6m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.02ft in | 310mm |
|---|---|---|
| Length With Bucket On Ground | 15.03ft in | 4580mm |
| Width Over Tires | 5.42ft in | 1650mm |
| Height To Top Of Cab | 8.34ft in | 2540mm |
| Wheelbase | 6.24ft in | 1900mm |
| Hinge Pin - Max Height | 10.24ft in | 3120mm |
| Reach At Max Lift And Dump | 2.96ft in | 900mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.