Specification sheet Wheel Loader Ref komatsu-wa50-3-wheel-loader

Komatsu WA50-3

The Komatsu WA50-3 is a wheel loader with an operating weight of 8,200 lb (3,720 kg), a 37 hp engine, and a 0.75 yd³ (0.6 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
8,200lb
3,720kg
Engine power
37hp
27.2kW
Net Power
Bucket capacity
0.75yd³
0.6m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WA50-3 sits at the compact end of its class:

  • Operating weight 8,200 lb lighter than 86% (n=374)
  • Engine power 37 hp less powerful than 92% (n=367)
  • Bucket capacity 0.8 yd³ smaller-bucket than 90% (n=309)

Scale drawingdrawn to scale · mm

2500B310C4550A
Side elevation
2500B1655D
Front elevation

01 Engine Specification

Number Of Cylinders 3
Engine Make 2238
Engine Model S3D84E-3B
Net Power 37hp 27.2kw
Power Measured @ 2500rpm
Displacement 91cu in 1.5L
Aspiration Tuurbocharged

02 Operational Specification

Operating Weight 8200lb 3720kg
Fuel Capacity 11.9gal 42L
Hydraulic System Fluid Capacity 7.4gal 28L
Engine Oil Fluid Capacity 1.3gal 4.7L
Cooling System Fluid Capacity 1.5gal 5.8L
Static Tipping Weight 5830lb 2550kg
Turning Radius 10.5ft in 3210mm

03 Transmission Specification

Transmission Type Hydrostatic
Max Speed - Forward 9.3mph 15km/h
Max Speed - Reverse 9.3mph 15km/h

04 Hydraulic System Specification

Relief Valve Setting 2990psi --
Pump Flow Capacity 11.4gal/min 43L/min
Raise Time 4.6sec
Dump Time 1sec
Lower Time 2.8sec

05 Bucket Dimensions

Dump Clearance At Max Raise 7ft in 2140mm
Bucket Capacity - Heaped 0.75yd3 0.6m3
Bucket Width 5.58ft in 1690mm
Breakout Force 6720lb 3050kN

06 Dimensions Dimensions

Ground Clearance 1ft in 310mm
Length With Bucket On Ground 14.92ft in 4550mm
Width Over Tires 5.42ft in 1655mm
Height To Top Of Cab 8.17ft in 2500mm
Wheelbase 6.08ft in 1850mm
Hinge Pin - Max Height 10.25ft in 3115mm
Reach At Max Lift And Dump 2.96ft in 900mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.