Specification sheet Wheel Loader Ref komatsu-wa470-7-wheel-loader

Komatsu WA470-7

The Komatsu WA470-7 is a wheel loader with an operating weight of 52,888.9 lb (23,990 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
52,888.9lb
23,990kg

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the Komatsu WA470-7 sits in the middle of its class:

  • Operating weight 52,890 lb lighter than 51% (n=198)

Not positioned on engine power, bucket capacity — withheld or unpublished for this machine.

01 Tyres Specification

Standard Fitment Size 26.5 R25 L3

02 Steering System Specification

Steering System Type Articulated type, full-hydraulic power steering
Minimum Turning Radius At The Centre Of Outside Tire 21.8ft in 6630mm
Steering Angle 35degrees

03 Engine Specification

Horsepower, Gross-Sae J1995 273.6hp 204kw
Horsepower, Net-Iso 9249 272.3hp 203kw
Horsepower, Net-Sae J1349 272.3hp 203kw
Fan Drive Method Hydraulic
Lubrication Method Gear pump, force-lubrication
Filter Full-flow type
Number Of Cylinders 6
Engine Model Komatsu SAA6D125E-6
Engine Type Water-cooled, 4-cycle
Air Cleaner Dry type with double elements and dust evacuator, plus dust indicator
Governor All-speed, electronic
Rated Power ​2000
Displacement 673.8cu in 11.1L
Aspiration Turbocharged, aftercooled, cooled EGR
Fuel Type Direct injection
Bore 3.6in 90mm
Stroke 17.4in 441mm

04 Driveline Specification

Brake Hydraulic, Wet disc
Ride Control System Standard
Maximum Speeds Fwd 23.8mph 38.3km/h
Maximum Speeds Rev 24.3mph 39km/h
Number Of Speeds - Forward 4
Number Of Speeds - Reverse 4
Transmission Type Automatic Powershift

05 Capacities Specification

Front Axle 3478.4cu in 57L
Fuel Tank 100.4gal 380L
Cooling System 21.2gal 80L
Rear Axle 14.8gal 56L
Hydraulic System 45.8gal 173L
Engine Oil 10.1gal 38L
Torque Converter, Transmission And Retarder Cooling 17.2gal 65L

06 Operational Specification

Bucket Capacity Range – Sae 3.6 - 5.2
Standard Bucket Capacity – Sae 4.65
Bucket Description GP Bucket, bolt on edge
Static Tipping Load,Full Turn 38735.3lb 17570kg
Breakout Force 19600
Dump Clearance, @45 Degrees Dump Angle 10.5ft in 3185mm
Dump Reach, @45 Degrees Dump Angle 4.1ft in 1235mm
Bucket Width 10.5ft in 3170mm
Bucket Link Type Z-Bar

07 Transmission Specification

Transmission Type Automatic full-powershift, countershaft type

08 Weights Specification

Operating Weight 52888.9lb 23990kg

09 Hydraulic System Specification

Steering Pump Type Piston Pump
Loader Control Type Piston Pump
Number Of Cylinders 2
Bore 3.6in 90mm
Hydraulic Pump Piston pump
Steering System Relief Valve Setting 3553.5psi 24500kPa
Loader Control Relief Valve Setting 4974.8psi 34300kPa
Steering System Capacity 51.6gal/min 195L/min
Loader Control Capacity 68.7gal/min 260L/min
Control Valve 2-spool type
Control Positions Boom Raise, hold, lower, and float
Control Positions Bucket Tilt-back, hold, and dump
Hydraulic Cylinders Type Double-acting, piston type
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Stroke 441 mm
Raise Time 6.1sec
Dump Time 1.6sec
Lower Time 3.1sec

10 Final Drive Specification

Reduction Gear Spiral bevel gear
Differential Gear Conventional type
Final Reduction Gear Planetary gear, single reduction
Drive System Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 26˚ total oscillation

11 Brakes Specification

Parking Brake Wet disc brake
Service Brake Hydraulically actuated, wet multiple-disc brakes actuate on four wheels.
Emergency Brake Parking brake is commonly used

12 Dimensions Dimensions

Ground Clearance 1.73ft in 525mm
Height To Top Of Cab 11.49ft in 3500mm
Wheelbase 135.83in 3450mm
Length 8875 mm
Turning Circle 50.2ft in 15300mm
Width Over Tyres 118.51in 3010mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.