Specification sheet Wheel Loader Ref komatsu-wa470-3-wheel-loader

Komatsu WA470-3

The Komatsu WA470-3 is a wheel loader with an operating weight of 47,641.9 lb (21,610 kg), a 260.16 hp engine, and a 5.5 yd³ (4.2 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
47,641.9lb
21,610kg
Engine power
260.16hp
194kW
Gross Power
Bucket capacity
5.5yd³
4.2m³

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the Komatsu WA470-3 sits below the median for its class:

  • Operating weight 47,640 lb lighter than 85% (n=198)
  • Engine power 260 hp less powerful than 71% (n=190)
  • Bucket capacity 5.5 yd³ smaller-bucket than 56% (n=174)

Scale drawingdrawn to scale · mm

3395B460C8690A
Side elevation
3395B2920D
Front elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2238
Engine Model S6D125
Gross Power 260.2hp 194kw
Power Measured @ 2200rpm
Displacement 671.3cu in 11L

02 Operational Specification

Operating Weight 47641.9lb 21610kg
Fuel Capacity 105.7gal 400L
Static Tipping Weight 36078.7lb 16365kg
Turning Radius 22.7ft in 6890mm
Tire Size 23.5-25-20PR

03 Transmission Specification

Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 19.6mph 31.5km/h
Max Speed - Reverse 20.4mph 32.7km/h

04 Bucket Dimensions

Dump Clearance At Max Raise 10.24ft in 3120mm
Bucket Capacity - Heaped 5.5yd3 4.2m3
Bucket Capacity - Struck 4.71yd3 3.6m3
Bucket Width 10.41ft in 3170mm
Breakout Force 43200lb 192.17kN

05 Dimensions Dimensions

Ground Clearance 1.51ft in 460mm
Length With Bucket On Ground 28.52ft in 8690mm
Width Over Tires 9.59ft in 2920mm
Height To Top Of Cab 11.14ft in 3395mm
Wheelbase 11.16ft in 3400mm
Hinge Pin - Max Height 14.1ft in 4295mm
Reach At Max Lift And Dump 4.12ft in 1255mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.