Specification sheet Wheel Loader Ref komatsu-wa430-6-waste-handler-wheel-loader
Komatsu WA430-6 Waste Handler
The Komatsu WA430-6 Waste Handler is a wheel loader with an operating weight of 44,487.08 lb (20,179 kg), a 231 hp engine, and a 7.46 yd³ (5.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
44,487.08lb
20,179kg
Engine power
231hp
172kW
Net Power Bucket capacity
7.46yd³
5.7m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu WA430-6 Waste Handler sits at the heavy end of its class:
- Operating weight 44,490 lb heavier than 99% (n=439)
- Engine power 231 hp more powerful than 95% (n=408)
- Bucket capacity 7.5 yd³ larger-bucket than 99% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2238 | |
|---|---|---|
| Engine Model | SAA6D114E-3 | |
| Net Power | 231hp | 172kw |
| Power Measured @ | 2100rpm |
02 Operational Specification
| Operating Weight | 44487.1lb | 20179kg |
|---|---|---|
| Static Tipping Weight | 31768.7lb | 14410kg |
| Turning Radius | 25ft in | 7593.5mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Tire Size | 23.5-R25 L3 |
03 Transmission Specification
| Transmission Type | Automatic shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 9.11ft in | 2774mm |
|---|---|---|
| Bucket Width | 11.16ft in | 3400mm |
| Bucket Capacity - Heaped | 7.46yd3 | 5.7m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.5ft in | 455mm |
|---|---|---|
| Length With Bucket On Ground | 28.81ft in | 8780mm |
| Width Over Tires | 9.25ft in | 2820mm |
| Height To Top Of Cab | 11.08ft in | 3390mm |
| Wheelbase | 10.83ft in | 3300mm |
| Hinge Pin - Max Height | 13.67ft in | 4165mm |
| Reach At Max Lift And Dump | 4.6ft in | 1400mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.