Specification sheet Wheel Loader Ref komatsu-wa430-5-wheel-loader
Komatsu WA430-5
The Komatsu WA430-5 is a wheel loader with an operating weight of 40,289.49 lb (18,275 kg), a 187.8 hp engine, and a 4.58 yd³ (3.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
40,289.49lb
18,275kg
Engine power
187.8hp
140kW
Net Power Bucket capacity
4.58yd³
3.5m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu WA430-5 sits above the median for its class:
- Operating weight 40,290 lb heavier than 85% (n=439)
- Engine power 188 hp more powerful than 70% (n=408)
- Bucket capacity 4.6 yd³ larger-bucket than 92% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2238 | |
|---|---|---|
| Engine Model | SAA6D125E-3 | |
| Net Power | 187.8hp | 140kw |
02 Operational Specification
| Operating Weight | 40289.5lb | 18275kg |
|---|---|---|
| Fuel Capacity | 79.3gal | 300L |
| Static Tipping Weight | 30589.2lb | 13875kg |
| Tire Size | 23.5X25 16PR L5 |
03 Transmission Specification
| Transmission Type | full powershift counter shaft | |
|---|---|---|
| Max Speed - Forward | 20.7mph | 33.2km/h |
| Max Speed - Reverse | 21.7mph | 34.9km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 9.85ft in | 3000mm |
|---|---|---|
| Breakout Force | _- | 195kN |
| Bucket Capacity - Heaped | 4.58yd3 | 3.5m3 |
| Bucket Width | 10.18ft in | 3100mm |
05 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 460mm |
|---|---|---|
| Length With Bucket On Ground | 27.99ft in | 8530mm |
| Height To Top Of Cab | 11.09ft in | 3380mm |
| Wheelbase | 7.71ft in | 2350mm |
| Reach At Max Lift And Dump | 3.97ft in | 1210mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.