Specification sheet Wheel Loader Ref komatsu-wa380-6-waste-handler-wheel-loader
Komatsu WA380-6 Waste Handler
The Komatsu WA380-6 Waste Handler is a wheel loader with an operating weight of 45,062.49 lb (20,440 kg), a 191 hp engine, and a 7.07 yd³ (5.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
45,062.49lb
20,440kg
Engine power
191hp
142kW
Net Power Bucket capacity
7.07yd³
5.4m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Komatsu WA380-6 Waste Handler sits at the compact end of its class:
- Operating weight 45,060 lb lighter than 99% (n=198)
- Engine power 191 hp less powerful than 94% (n=190)
- Bucket capacity 7.1 yd³ larger-bucket than 89% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2238 | |
|---|---|---|
| Engine Model | SAA6D107E | |
| Net Power | 191hp | 142kw |
| Power Measured @ | 2100rpm |
02 Operational Specification
| Operating Weight | 45062.5lb | 20440kg |
|---|---|---|
| Static Tipping Weight | 33896.1lb | 15375kg |
| Turning Radius | 22.1ft in | 6726.5mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Tire Size | 23.5-25 L3 |
03 Transmission Specification
| Transmission Type | Auto shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.98ft in | 2737mm |
|---|---|---|
| Bucket Width | 11.17ft in | 3403mm |
| Bucket Capacity - Heaped | 7.07yd3 | 5.4m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.54ft in | 467mm |
|---|---|---|
| Length With Bucket On Ground | 27.23ft in | 8299mm |
| Width Over Tires | 9.08ft in | 2780mm |
| Height To Top Of Cab | 11.18ft in | 3405mm |
| Wheelbase | 10.83ft in | 3300mm |
| Hinge Pin - Max Height | 13.52ft in | 4120mm |
| Reach At Max Lift And Dump | 4.56ft in | 1387mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.