Specification sheet Wheel Loader Ref komatsu-wa380-6-high-lift-wheel-loader
Komatsu WA380-6 High Lift
The Komatsu WA380-6 High Lift is a wheel loader with an operating weight of 45,787.81 lb (20,769 kg), a 231 hp engine, and a 7.07 yd³ (5.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
45,787.81lb
20,769kg
Engine power
231hp
172kW
Net Power Bucket capacity
7.07yd³
5.4m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Komatsu WA380-6 High Lift sits at the compact end of its class:
- Operating weight 45,790 lb lighter than 94% (n=198)
- Engine power 231 hp less powerful than 87% (n=190)
- Bucket capacity 7.1 yd³ larger-bucket than 89% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2238 | |
|---|---|---|
| Engine Model | SAA6D114E-3 | |
| Net Power | 231hp | 172kw |
| Power Measured @ | 2100rpm |
02 Operational Specification
| Operating Weight | 45787.9lb | 20769kg |
|---|---|---|
| Static Tipping Weight | 25024.7lb | 11351kg |
| Turning Radius | 23.5ft in | 7158mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Tire Size | 23.5-R25 L3 |
03 Transmission Specification
| Transmission Type | Automatic shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 10.72ft in | 3266mm |
|---|---|---|
| Bucket Width | 11.17ft in | 3403mm |
| Bucket Capacity - Heaped | 7.07yd3 | 5.4m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.54ft in | 467mm |
|---|---|---|
| Length With Bucket On Ground | 29.73ft in | 9059mm |
| Width Over Tires | 9.13ft in | 2780mm |
| Height To Top Of Cab | 11.18ft in | 3405mm |
| Wheelbase | 10.83ft in | 3300mm |
| Hinge Pin - Max Height | 15.26ft in | 4650mm |
| Reach At Max Lift And Dump | 5ft in | 1521mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.