Specification sheet Wheel Loader Ref komatsu-wa380-3-wheel-loader
Komatsu WA380-3
The Komatsu WA380-3 is a wheel loader with an operating weight of 35,902.29 lb (16,285 kg), a 187.75 hp engine, and a 4.19 yd³ (3.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
35,902.29lb
16,285kg
Engine power
187.75hp
140kW
Gross Power Bucket capacity
4.19yd³
3.2m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu WA380-3 sits above the median for its class:
- Operating weight 35,900 lb heavier than 69% (n=439)
- Engine power 188 hp more powerful than 70% (n=408)
- Bucket capacity 4.2 yd³ larger-bucket than 82% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2238 | |
|---|---|---|
| Engine Model | S6D108 | |
| Gross Power | 187.8hp | 140kw |
| Displacement | 436.4cu in | 7.2L |
02 Operational Specification
| Operating Weight | 35902.3lb | 16285kg |
|---|---|---|
| Fuel Capacity | 75.9gal | 287L |
| Static Tipping Weight | 27513.7lb | 12480kg |
| Turning Radius | 21.1ft in | 6430mm |
| Tire Size | 20.5-25-16PR |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 19.6mph | 31.5km/h |
| Max Speed - Reverse | 20.2mph | 32.5km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 9.6ft in | 2925mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.19yd3 | 3.2m3 |
| Bucket Capacity - Struck | 3.54yd3 | 2.7m3 |
| Bucket Width | 9.54ft in | 2905mm |
| Breakout Force | 33300lb | 148.13kN |
05 Dimensions Dimensions
| Ground Clearance | 1.28ft in | 390mm |
|---|---|---|
| Length With Bucket On Ground | 26.14ft in | 7965mm |
| Width Over Tires | 8.85ft in | 2695mm |
| Height To Top Of Cab | 10.88ft in | 3315mm |
| Wheelbase | 10.5ft in | 3200mm |
| Hinge Pin - Max Height | 13.23ft in | 4030mm |
| Reach At Max Lift And Dump | 3.84ft in | 1170mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.