Specification sheet Wheel Loader Ref komatsu-wa380-3-active-plus-wheel-loader
Komatsu WA380-3 Active+
The Komatsu WA380-3 Active+ is a wheel loader with an operating weight of 38,955.68 lb (17,670 kg), a 192 hp engine, and a 4.06 yd³ (3.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
38,955.68lb
17,670kg
Engine power
192hp
143.18kW
Gross Power Bucket capacity
4.06yd³
3.1m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu WA380-3 Active+ sits above the median for its class:
- Operating weight 38,960 lb heavier than 80% (n=439)
- Engine power 192 hp more powerful than 72% (n=408)
- Bucket capacity 4.1 yd³ larger-bucket than 79% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | S6D114 E-1 | |
| Gross Power | 192hp | 143.2kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 626.2lb ft | 849Nm |
| Displacement | 506.5cu in | 8.3L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 38955.7lb | 17670kg |
|---|---|---|
| Fuel Capacity | 75.9gal | 287L |
| Hydraulic System Fluid Capacity | 50.2gal | 190L |
| Engine Oil Fluid Capacity | 6gal | 22.4L |
| Cooling System Fluid Capacity | 14.1gal | 53L |
| Transmission Fluid Capacity | 12.7gal | 48L |
| Front Axle/Diff Fluid Capacity | 9.8gal | 37L |
| Rear Axle/Diff Fluid Capacity | 9.8gal | 37L |
| Static Tipping Weight | 31140.3lb | 14125kg |
| Turning Radius | 19.2ft in | 5840mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 23.5 R 25 XHA L3 |
03 Transmission Specification
| Transmission Type | fully automatic powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23mph | 37km/h |
| Max Speed - Reverse | 23.7mph | 38km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3045.8psi | 21000kPa |
|---|---|---|
| Pump Flow Capacity | 79.3gal/min | 300L/min |
| Raise Time | 5.1sec | |
| Dump Time | 1.5sec | |
| Lower Time | 3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.88ft in | 3010mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.06yd3 | 3.1m3 |
| Bucket Width | 9.57ft in | 2916mm |
| Breakout Force | 34845.39lb | 155kN |
06 Dimensions Dimensions
| Ground Clearance | 1.45ft in | 440mm |
|---|---|---|
| Length With Bucket On Ground | 25.74ft in | 7845mm |
| Width Over Tires | 9.09ft in | 2770mm |
| Height To Top Of Cab | 11.09ft in | 3380mm |
| Wheelbase | 10.5ft in | 3200mm |
| Hinge Pin - Max Height | 13.38ft in | 4077mm |
| Reach At Max Lift And Dump | 3.65ft in | 1112mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.