Specification sheet Wheel Loader Ref komatsu-wa320-3-custom-wheel-loader
Komatsu WA320-3 CUSTOM
The Komatsu WA320-3 CUSTOM is a wheel loader with an operating weight of 29,431.72 lb (13,350 kg), a 152.88 hp engine, and a 3.54 yd³ (2.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
29,431.72lb
13,350kg
Engine power
152.88hp
114kW
Gross Power Bucket capacity
3.54yd³
2.7m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu WA320-3 CUSTOM sits in the middle of its class:
- Operating weight 29,430 lb lighter than 58% (n=439)
- Engine power 153 hp less powerful than 61% (n=408)
- Bucket capacity 3.5 yd³ larger-bucket than 61% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | SA6D102E | |
| Gross Power | 152.9hp | 114kw |
| Power Measured @ | 2350rpm | |
| Displacement | 358.9cu in | 5.9L |
02 Operational Specification
| Operating Weight | 29431.8lb | 13350kg |
|---|---|---|
| Fuel Capacity | 52.9gal | 200L |
| Turning Radius | 20ft in | 6080mm |
| Tire Size | 20.5-25 |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.2mph | 34km/h |
| Max Speed - Reverse | 21.8mph | 35km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 9.36ft in | 2850mm |
|---|---|---|
| Bucket Capacity - Struck | 3.01yd3 | 2.3m3 |
| Bucket Width | 8.99ft in | 2740mm |
| Bucket Capacity - Heaped | 3.54yd3 | 2.7m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.32ft in | 400mm |
|---|---|---|
| Length With Bucket On Ground | 24.32ft in | 7410mm |
| Width Over Tires | 8.49ft in | 2585mm |
| Height To Top Of Cab | 10.95ft in | 3335mm |
| Wheelbase | 9.95ft in | 3030mm |
| Hinge Pin - Max Height | 12.75ft in | 3885mm |
| Reach At Max Lift And Dump | 3.4ft in | 1035mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.