Specification sheet Wheel Loader Ref komatsu-wa300l-3-wheel-loader
Komatsu WA300L-3
The Komatsu WA300L-3 is a wheel loader with an operating weight of 29,189.21 lb (13,240 kg), a 152.88 hp engine, and a 3.27 yd³ (2.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
29,189.21lb
13,240kg
Engine power
152.88hp
114kW
Gross Power Bucket capacity
3.27yd³
2.5m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu WA300L-3 sits in the middle of its class:
- Operating weight 29,190 lb lighter than 58% (n=439)
- Engine power 153 hp less powerful than 61% (n=408)
- Bucket capacity 3.3 yd³ larger-bucket than 51% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | SA6D102E | |
| Gross Power | 152.9hp | 114kw |
| Power Measured @ | 2350rpm | |
| Displacement | 358.9cu in | 5.9L |
02 Operational Specification
| Operating Weight | 29189.3lb | 13240kg |
|---|---|---|
| Fuel Capacity | 49.7gal | 188L |
| Static Tipping Weight | 24493.4lb | 11110kg |
| Tire Size | 20.5-25-12PR |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.2mph | 34km/h |
| Max Speed - Reverse | 21.8mph | 35km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 9.52ft in | 2900mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.27yd3 | 2.5m3 |
| Bucket Capacity - Struck | 2.75yd3 | 2.1m3 |
| Bucket Width | 8.99ft in | 2740mm |
| Breakout Force | 28770lb | 127.98kN |
05 Dimensions Dimensions
| Ground Clearance | 1.32ft in | 400mm |
|---|---|---|
| Length With Bucket On Ground | 24.09ft in | 7340mm |
| Width Over Tires | 8.49ft in | 2585mm |
| Height To Top Of Cab | 10.52ft in | 3205mm |
| Wheelbase | 9.95ft in | 3030mm |
| Hinge Pin - Max Height | 12.75ft in | 3885mm |
| Reach At Max Lift And Dump | 3.24ft in | 985mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.