Specification sheet Wheel Loader Ref komatsu-wa270-3-wheel-loader
Komatsu WA270-3
The Komatsu WA270-3 is a wheel loader with an operating weight of 27,116.86 lb (12,300 kg), and a 2.75 yd³ (2.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
27,116.86lb
12,300kg
Bucket capacity
2.75yd³
2.1m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu WA270-3 sits below the median for its class:
- Operating weight 27,120 lb lighter than 72% (n=439)
- Bucket capacity 2.8 yd³ smaller-bucket than 70% (n=387)
Not positioned on engine power — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Model | S6D102E1 | |
| Max Torque | 417.5lb ft | 566Nm |
| Displacement | 360.1cu in | 5.9L |
02 Operational Specification
| Operating Weight | 27116.9lb | 12300kg |
|---|---|---|
| Fuel Capacity | 48.9gal | 185L |
| Hydraulic System Fluid Capacity | 31.8gal | 120L |
| Max Speed | 26mph | 41.8km/h |
| Tire Size | 20.5 R25 |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 |
04 Hydraulic System Specification
| Pump Flow Capacity | 83gal/min | 314L/min |
|---|
05 Bucket Dimensions
| Bucket Capacity - Heaped | 2.75yd3 | 2.1m3 |
|---|---|---|
| Bucket Capacity - Struck | 2.36yd3 | 1.8m3 |
06 Dimensions Dimensions
| Width Over Tires | 8.01ft in | 2440mm |
|---|---|---|
| Height To Top Of Cab | 10.67ft in | 3250mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 12.41ft in | 3782mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.