Specification sheet Wheel Loader Ref komatsu-wa250-6-wheel-loader
Komatsu WA250-6
The Komatsu WA250-6 is a wheel loader with an operating weight of 25,448 lb (11,545 kg), a 138 hp engine, and a 3 yd³ (2.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
25,448lb
11,545kg
Engine power
138hp
103kW
Net Power Bucket capacity
3yd³
2.3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu WA250-6 sits below the median for its class:
- Operating weight 25,450 lb lighter than 81% (n=439)
- Engine power 138 hp less powerful than 76% (n=408)
- Bucket capacity 3 yd³ smaller-bucket than 66% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | SAA6D107E-1 | |
| Net Power | 138hp | 103kw |
| Gross Power | 140hp | 104kw |
| Power Measured @ | 2000rpm | |
| Displacement | 408cu in | 6.7L |
| Aspiration | Turbo-charged |
02 Operational Specification
| Operating Weight | 25448lb | 11545kg |
|---|---|---|
| Fuel Capacity | 49.1gal | 186L |
| Hydraulic System Fluid Capacity | 17.7gal | 67L |
| Engine Oil Fluid Capacity | 6.1gal | 23L |
| Cooling System Fluid Capacity | 5.8gal | 22L |
| Front Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Rear Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Static Tipping Weight | 26367lb | 11960kg |
| Turning Radius | 39.6ft in | 12060mm |
03 Transmission Specification
| Transmission Type | Hydrostatic, 1 pump, 2 motors with speed range select | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23.6mph | 38km/h |
| Max Speed - Reverse | 23.6mph | 38km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000 | |
|---|---|---|
| Pump Flow Capacity | 20.6gal/min | 78L/min |
| Raise Time | 6.3sec | |
| Dump Time | 1.7sec | |
| Lower Time | 3.6sec | |
| Pump Type | Gear type pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.33ft in | 2850mm |
|---|---|---|
| Breakout Force | 27210lb | 121kN |
| Bucket Capacity - Heaped | 3yd3 | 2.3m3 |
| Bucket Capacity - Struck | 2.62yd3 | 2m3 |
| Bucket Width | 8.83ft in | 2685mm |
06 Dimensions Dimensions
| Ground Clearance | 1.5ft in | 465mm |
|---|---|---|
| Length With Bucket On Ground | 23.17ft in | 7055mm |
| Width Over Tires | 8.08ft in | 2470mm |
| Height To Top Of Cab | 10.5ft in | 3200mm |
| Wheelbase | 9.5ft in | 2900mm |
| Hinge Pin - Max Height | 12.42ft in | 3795mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.