Specification sheet Wheel Loader Ref komatsu-wa250-5l-wheel-loader
Komatsu WA250-5L
The Komatsu WA250-5L is a wheel loader with an operating weight of 25,507.5 lb (11,570.01 kg), and a 135 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
25,507.5lb
11,570.01kg
Engine power
135hp
100.67kW
Gross Power ◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu WA250-5L sits below the median for its class:
- Operating weight 25,510 lb lighter than 81% (n=439)
- Engine power 135 hp less powerful than 80% (n=408)
Not positioned on bucket capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | SAA6 D102E | |
| Gross Power | 135hp | 100.7kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 455.8lb ft | 618Nm |
| Displacement | 360cu in | 5.9L |
| Torque Measured @ | 1400rpm | |
| Aspiration | TURBOCHARGED |
02 Operational Specification
| Operating Weight | 25507.5lb | 11570.1kg |
|---|---|---|
| Fuel Capacity | 47.8gal | 181L |
| Hydraulic System Fluid Capacity | 17.7gal | 67.1L |
| Engine Oil Fluid Capacity | 5.2gal | 19.7L |
| Cooling System Fluid Capacity | 4.6gal | 17.5L |
| Transmission Fluid Capacity | 1.8gal | 6.9L |
| Front Axle/Diff Fluid Capacity | 4.8gal | 18.2L |
| Rear Axle/Diff Fluid Capacity | 4.8gal | 18.2L |
| Static Tipping Weight | 22068.3lb | 10010.1kg |
| Turning Radius | 17.2ft in | 5242.6mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 20.5-25 |
03 Transmission Specification
| Transmission Type | HYDROSTATIC | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23.6mph | 38km/h |
| Max Speed - Reverse | 23.6mph | 38km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3045.8psi | 21000.1kPa |
|---|---|---|
| Pump Flow Capacity | 43.1gal/min | 163.2L/min |
| Raise Time | 6.3sec | |
| Dump Time | 1.7sec | |
| Lower Time | 3.3sec | |
| Pump Type | GEAR PUMP |
05 Dimensions Dimensions
| Ground Clearance | 1.5ft in | 457.2mm |
|---|---|---|
| Length With Bucket On Ground | 22.7ft in | 6918.96mm |
| Width Over Tires | 8.1ft in | 2468.88mm |
| Height To Top Of Cab | 10.6ft in | 3230.88mm |
| Wheelbase | 9.5ft in | 2895.6mm |
| Hinge Pin - Max Height | 12.4ft in | 3779.52mm |
| Reach At Max Lift And Dump | 3.3ft in | 1005.84mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.