Specification sheet Wheel Loader Ref komatsu-wa250-3-wheel-loader
Komatsu WA250-3
The Komatsu WA250-3 is a wheel loader with an operating weight of 23,104.45 lb (10,480 kg), a 130.08 hp engine, and a 2.75 yd³ (2.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
23,104.45lb
10,480kg
Engine power
130.08hp
97kW
Gross Power Bucket capacity
2.75yd³
2.1m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu WA250-3 sits at the compact end of its class:
- Operating weight 23,100 lb lighter than 93% (n=439)
- Engine power 130 hp less powerful than 82% (n=408)
- Bucket capacity 2.8 yd³ smaller-bucket than 70% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | S6D102E | |
| Gross Power | 130.1hp | 97kw |
| Power Measured @ | 2400rpm | |
| Displacement | 359cu in | 5.9L |
02 Operational Specification
| Operating Weight | 23104.5lb | 10480kg |
|---|---|---|
| Fuel Capacity | 48.7gal | 184L |
| Static Tipping Weight | 20216.4lb | 9170kg |
| Turning Radius | 19ft in | 5780mm |
| Tire Size | 17.5-25-12PR |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 21.8mph | 35km/h |
04 Bucket Dimensions
| Bucket Capacity - Heaped | 2.75yd3 | 2.1m3 |
|---|---|---|
| Bucket Capacity - Struck | 2.36yd3 | 1.8m3 |
| Bucket Width | 8.81ft in | 2685mm |
| Breakout Force | 20940lb | 93.15kN |
05 Dimensions Dimensions
| Ground Clearance | 1.3ft in | 395mm |
|---|---|---|
| Length With Bucket On Ground | 22.92ft in | 6985mm |
| Width Over Tires | 7.8ft in | 2375mm |
| Height To Top Of Cab | 10.49ft in | 3195mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 12.08ft in | 3680mm |
| Reach At Max Lift And Dump | 3.42ft in | 1040mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.