Specification sheet Wheel Loader Ref komatsu-wa200-6-wheel-loader
Komatsu WA200-6
The Komatsu WA200-6 is a wheel loader with an operating weight of 23,259 lb (10,550 kg), a 126 hp engine, and a 2.6 yd³ (2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
23,259lb
10,550kg
Engine power
126hp
94kW
Net Power Bucket capacity
2.6yd³
2m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu WA200-6 sits at the compact end of its class:
- Operating weight 23,260 lb lighter than 93% (n=439)
- Engine power 126 hp less powerful than 87% (n=408)
- Bucket capacity 2.6 yd³ smaller-bucket than 76% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | SAA4D107E-1 | |
| Net Power | 126hp | 94kw |
| Gross Power | 128hp | 95.2kw |
| Power Measured @ | 2000rpm | |
| Displacement | 272cu in | 4.5L |
| Aspiration | Turbo-charged |
02 Operational Specification
| Operating Weight | 23259lb | 10550kg |
|---|---|---|
| Fuel Capacity | 46.8gal | 177L |
| Hydraulic System Fluid Capacity | 15.3gal | 58L |
| Engine Oil Fluid Capacity | 4.1gal | 15.5L |
| Cooling System Fluid Capacity | 4.5gal | 17L |
| Front Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Rear Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Static Tipping Weight | 21363lb | 9690kg |
| Turning Radius | 38.5ft in | 11700mm |
03 Transmission Specification
| Transmission Type | Hydrostatic, 1 pump, 2 motors with speed range select | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23.6mph | 38km/h |
| Max Speed - Reverse | 23.6mph | 38km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20600kPa |
|---|---|---|
| Pump Flow Capacity | 22.5gal/min | 85L/min |
| Raise Time | 5.9sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.6sec | |
| Pump Type | Gear type pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.25ft in | 2830mm |
|---|---|---|
| Breakout Force | 20944lb | 93.2kN |
| Bucket Capacity - Heaped | 2.6yd3 | 2m3 |
| Bucket Capacity - Struck | 2.23yd3 | 1.7m3 |
| Bucket Width | 8.33ft in | 2550mm |
06 Dimensions Dimensions
| Ground Clearance | 1.67ft in | 495mm |
|---|---|---|
| Length With Bucket On Ground | 22.58ft in | 6895mm |
| Width Over Tires | 8.08ft in | 2470mm |
| Height To Top Of Cab | 10.42ft in | 3180mm |
| Wheelbase | 9.33ft in | 2840mm |
| Hinge Pin - Max Height | 12.17ft in | 3705mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.