Specification sheet Wheel Loader Ref komatsu-wa180-3-wheel-loader
Komatsu WA180-3
The Komatsu WA180-3 is a wheel loader with an operating weight of 20,569.14 lb (9,330 kg), a 110 hp engine, and a 2.1 yd³ (1.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
20,569.14lb
9,330kg
Engine power
110hp
82.03kW
Gross Power Bucket capacity
2.1yd³
1.6m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WA180-3 sits at the heavy end of its class:
- Operating weight 20,570 lb heavier than 92% (n=374)
- Engine power 110 hp more powerful than 89% (n=367)
- Bucket capacity 2.1 yd³ larger-bucket than 83% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | S6D102 E1 | |
| Gross Power | 110hp | 82.1kw |
| Power Measured @ | 2400rpm | |
| Max Torque | 307.6lb ft | 417Nm |
| Displacement | 360.1cu in | 5.9L |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 20569.2lb | 9330kg |
|---|---|---|
| Fuel Capacity | 45gal | 170L |
| Static Tipping Weight | 17482.7lb | 7930kg |
| Turning Radius | 17.9ft in | 5430mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 35amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 17.5 R25 |
03 Transmission Specification
| Transmission Type | Fully automatic, full powershift with 'kick-down' system | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 21.8mph | 35km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3045.8psi | 21000kPa |
|---|---|---|
| Pump Flow Capacity | 38.1gal/min | 144L/min |
| Raise Time | 5sec | |
| Dump Time | 1.1sec | |
| Lower Time | 2.5sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.47ft in | 2580mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.1yd3 | 1.6m3 |
| Bucket Width | 8.21ft in | 2500mm |
| Breakout Force | 20952.2lb | 93.2kN |
06 Dimensions Dimensions
| Ground Clearance | 1.4ft in | 425mm |
|---|---|---|
| Length With Bucket On Ground | 21.63ft in | 6590mm |
| Width Over Tires | 7.58ft in | 2310mm |
| Height To Top Of Cab | 10.16ft in | 3095mm |
| Wheelbase | 8.86ft in | 2700mm |
| Hinge Pin - Max Height | 11.62ft in | 3540mm |
| Reach At Max Lift And Dump | 3.58ft in | 1090mm |
?Questions & answersfrom this machine's data
- How much does a Komatsu WA180-3 wheel loader weigh?
- A Komatsu WA180-3 wheel loader has an operating weight of 20,569.1 lb (9,330 kg).
- What engine does a Komatsu WA180-3 wheel loader have?
- A Komatsu WA180-3 wheel loader is powered by a S6D102 E1 engine producing 110 hp (82 kW).
- What size bucket does a Komatsu WA180-3 wheel loader have?
- A Komatsu WA180-3 wheel loader has a bucket capacity of 2.1 yd³ (1.6 m³).
- How much fuel does a Komatsu WA180-3 wheel loader hold?
- A Komatsu WA180-3 wheel loader has a fuel capacity of 45 gal (170 L).
- What is the ground clearance of a Komatsu WA180-3 wheel loader?
- A Komatsu WA180-3 wheel loader has a ground clearance of 1.4 ft (425 mm).
- How long is a Komatsu WA180-3 wheel loader?
- A Komatsu WA180-3 wheel loader has an overall length of 21.6 ft (6,590 mm) with the bucket on the ground.
- How fast does a Komatsu WA180-3 wheel loader travel?
- A Komatsu WA180-3 wheel loader has a maximum forward travel speed of 21.5 mph (34.5 km/h).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.