Specification sheet Wheel Loader Ref komatsu-wa150-5-wheel-loader
Komatsu WA150-5
The Komatsu WA150-5 is a wheel loader with an operating weight of 17,295.27 lb (7,845 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
17,295.27lb
7,845kg
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WA150-5 sits above the median for its class:
- Operating weight 17,300 lb heavier than 74% (n=374)
Not positioned on engine power, bucket capacity — withheld or unpublished for this machine.
01 Engine Specification
| Horsepower, Gross-Sae J1995 | 99.3hp | 74kw |
|---|---|---|
| Horsepower, Net-Iso 9249 | 95.3hp | 71kw |
| Horsepower, Net-Sae J1349 | 95.3hp | 71kw |
| Fan Drive Method | Hydraulic | |
| Lubrication System | Gear pump, force-lubrication | |
| Filter | Full-flow | |
| Number Of Cylinders | 4 | |
| Piston Displacement | 239.3cu in | 4L |
| Engine Make | 2238 | |
| Engine Model | SAA4D102E-2-B | |
| Engine Type | Water-cooled, 4-cycle | |
| Air Cleaner | Dry-type | |
| Governor | Mechanical, all-speed control | |
| Power Measured @ | 2000rpm | |
| Displacement | 239.3cu in | 4L |
| Aspiration | Turbocharged, and air-to-air after cooled | |
| Bore | 4.1in | 102mm |
| Stroke | 4.8in | 120mm |
| Fuel System | Direct injection |
02 Driveline Specification
| Brake | Hydraulic, wet disc | |
|---|---|---|
| Ride Control System | Standard | |
| Maximum Speeds Fwd | 24.3mph | 39km/h |
| Maximum Speeds Rev | 24.3mph | 39km/h |
| Number Of Speeds - Forward | 4 | |
| Number Of Speeds - Reverse | 4 | |
| Transmission Type | Hydrostatic |
03 Operational Specification
| Bucket Capacity Range – Sae | 1.3-1.7 m3 | |
|---|---|---|
| Standard Bucket Capacity – Sae | 2yd3 | 1.5m3 |
| Bucket Description | GP Bucket, bolt on edge | |
| Static Tipping Load,Full Turn | 13304.9lb | 6035kg |
| Breakout Force | 7400 kgf | |
| Dump Clearance, @45 Degrees Dump Angle | 9ft in | 2730mm |
| Dump Reach, @45 Degrees Dump Angle | 3.2ft in | 955mm |
| Bucket Width | 7.9ft in | 2390mm |
| Bucket Link Type | Z-Bar | |
| Operating Weight | 17295.3lb | 7845kg |
| Fuel Capacity | 35.2gal | 133L |
04 Transmission Specification
| Transmission Type | hydrostatic transmission | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 |
05 Tires Specification
| Standard Fitment Size | 17.5 R25 L2 |
|---|
06 Hydraulic System Specification
| Steering Pump Type | Gear | |
|---|---|---|
| Loader Control Type | Gear | |
| Steering System Relief Valve Setting | 391.7psi | 2700kPa |
| Loader Control Relief Valve Setting | 435.2psi | 3000kPa |
| Control Valve | 2-spool open center type | |
| Lift Cylinder Stroke | 24.8in | 628mm |
| Lift Cylinder | 2 | |
| Lift Cylinder Bore | 4.4in | 110mm |
| Bucket Cylinde Bore | 4.4in | 110mm |
| Bucket Cylinde Stroke | 17.8in | 452mm |
| Relief Valve Setting | 3045.8psi | 21000kPa |
| Pump Flow Capacity | 32.5gal/min | 123L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3.6sec | |
| Pump Type | gear |
07 Dimensions Dimensions
| Ground Clearance | 16.74in | 425mm |
|---|---|---|
| Wheelbase | 2600in | 66040mm |
| Length | 252.96in | 6425mm |
| Overall Height (To Top Of Cab) | 10.04ft in | 3060mm |
| Turning Clearance Circle | 10450 | |
| Width Over Tyres | 87.41in | 2220mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.