Specification sheet Wheel Loader Ref komatsu-wa120-3-wheel-loader
Komatsu WA120-3
The Komatsu WA120-3 is a wheel loader with an operating weight of 16,953.55 lb (7,690 kg), a 63 hp engine, and a 1.84 yd³ (1.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
16,953.55lb
7,690kg
Engine power
63hp
46.98kW
Gross Power Bucket capacity
1.84yd³
1.4m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WA120-3 sits above the median for its class:
- Operating weight 16,950 lb heavier than 73% (n=374)
- Engine power 63 hp less powerful than 59% (n=367)
- Bucket capacity 1.8 yd³ larger-bucket than 74% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | 6D95L | |
| Gross Power | 63hp | 47kw |
| Power Measured @ | 2400rpm | |
| Displacement | 298.5cu in | 4.9L |
02 Operational Specification
| Operating Weight | 16953.6lb | 7690kg |
|---|---|---|
| Fuel Capacity | 35.2gal | 133L |
| Static Tipping Weight | 13889.2lb | 6300kg |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 16.9-24 |
03 Transmission Specification
| Number Of Forward Gears | 3 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 21.8mph | 35km/h |
04 Hydraulic System Specification
| Pump Flow Capacity | 30.4gal/min | 115L/min |
|---|
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.83ft in | 2690mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.84yd3 | 1.4m3 |
| Bucket Capacity - Struck | 1.57yd3 | 1.2m3 |
| Bucket Width | 7.85ft in | 2390mm |
| Breakout Force | 13490lb | 60.01kN |
06 Dimensions Dimensions
| Ground Clearance | 1.28ft in | 390mm |
|---|---|---|
| Length With Bucket On Ground | 19.9ft in | 6065mm |
| Width Over Tires | 7.39ft in | 2250mm |
| Height To Top Of Cab | 10.06ft in | 3065mm |
| Wheelbase | 8.54ft in | 2600mm |
| Hinge Pin - Max Height | 11.32ft in | 3450mm |
| Reach At Max Lift And Dump | 3.24ft in | 985mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.