Specification sheet Wheel Loader Ref komatsu-wa120-3-batcher-wheel-loader
Komatsu WA120-3 Batcher
The Komatsu WA120-3 Batcher is a wheel loader with an operating weight of 17,284.25 lb (7,840 kg), a 84.49 hp engine, and a 1.84 yd³ (1.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
17,284.25lb
7,840kg
Engine power
84.49hp
63kW
Gross Power Bucket capacity
1.84yd³
1.4m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WA120-3 Batcher sits above the median for its class:
- Operating weight 17,280 lb heavier than 74% (n=374)
- Engine power 84 hp more powerful than 67% (n=367)
- Bucket capacity 1.8 yd³ larger-bucket than 74% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | S4D102E | |
| Gross Power | 84.5hp | 63kw |
| Power Measured @ | 2400rpm | |
| Displacement | 239.3cu in | 4L |
02 Operational Specification
| Operating Weight | 17284.3lb | 7840kg |
|---|---|---|
| Fuel Capacity | 35.2gal | 133L |
| Static Tipping Weight | 13889.2lb | 6300kg |
| Tire Size | 16.9-24 |
03 Transmission Specification
| Number Of Forward Gears | 3 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 21.8mph | 35km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.86ft in | 2700mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.84yd3 | 1.4m3 |
| Bucket Capacity - Struck | 1.57yd3 | 1.2m3 |
| Bucket Width | 7.85ft in | 2390mm |
| Breakout Force | 13490lb | 60.01kN |
05 Dimensions Dimensions
| Ground Clearance | 1.32ft in | 400mm |
|---|---|---|
| Length With Bucket On Ground | 19.61ft in | 5975mm |
| Width Over Tires | 7.39ft in | 2250mm |
| Height To Top Of Cab | 10.09ft in | 3075mm |
| Wheelbase | 8.54ft in | 2600mm |
| Hinge Pin - Max Height | 11.32ft in | 3450mm |
| Reach At Max Lift And Dump | 3.2ft in | 975mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.