Specification sheet Wheel Loader Ref komatsu-wa115pt-3-wheel-loader
Komatsu WA115PT-3
The Komatsu WA115PT-3 is a wheel loader with an operating weight of 16,435.47 lb (7,455 kg), a 87 hp engine, and a 1.71 yd³ (1.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
16,435.47lb
7,455kg
Engine power
87hp
64.88kW
Gross Power Bucket capacity
1.71yd³
1.3m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu WA115PT-3 sits above the median for its class:
- Operating weight 16,440 lb heavier than 70% (n=374)
- Engine power 87 hp more powerful than 69% (n=367)
- Bucket capacity 1.7 yd³ larger-bucket than 69% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | S4D 106-1HC | |
| Gross Power | 87hp | 64.9kw |
| Max Torque | 270lb ft | 366Nm |
| Displacement | 269.3cu in | 4.5L |
| Aspiration | Turbocharger |
02 Operational Specification
| Operating Weight | 16435.5lb | 7455kg |
|---|---|---|
| Fuel Capacity | 31.8gal | 120L |
| Hydraulic System Fluid Capacity | 22.5gal | 85L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Cooling System Fluid Capacity | 4gal | 15L |
| Front Axle/Diff Fluid Capacity | 1.2gal | 4.5L |
| Rear Axle/Diff Fluid Capacity | 1.2gal | 4.5L |
| Static Tipping Weight | 13371.1lb | 6065kg |
| Turning Radius | 14.9ft in | 4520mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 455/70 R24 SPT 9 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3045.8psi | 21000kPa |
|---|---|---|
| Pump Flow Capacity | 30.4gal/min | 115L/min |
| Raise Time | 4.9sec | |
| Dump Time | 1.5sec | |
| Lower Time | 3.7sec | |
| Pump Type | closed hydraulic system |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.11ft in | 2775mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.71yd3 | 1.3m3 |
| Bucket Width | 7.55ft in | 2300mm |
| Breakout Force | 16478.5lb | 73.3kN |
06 Dimensions Dimensions
| Ground Clearance | 1.25ft in | 378mm |
|---|---|---|
| Length With Bucket On Ground | 19.61ft in | 5975mm |
| Width Over Tires | 7.22ft in | 2200mm |
| Height To Top Of Cab | 9.88ft in | 3010mm |
| Wheelbase | 8.04ft in | 2450mm |
| Hinge Pin - Max Height | 11.8ft in | 3595mm |
| Reach At Max Lift And Dump | 2.68ft in | 815mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.