Specification sheet Wheel Loader Ref komatsu-wa-400-5-wheel-loader
Komatsu WA 400-5
The Komatsu WA 400-5 is a wheel loader with an operating weight of 42,031.14 lb (19,065 kg), a 208 hp engine, and a 4.32 yd³ (3.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
42,031.14lb
19,065kg
Engine power
208hp
155.11kW
Gross Power Bucket capacity
4.32yd³
3.3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu WA 400-5 sits at the heavy end of its class:
- Operating weight 42,030 lb heavier than 92% (n=439)
- Engine power 208 hp more powerful than 83% (n=408)
- Bucket capacity 4.3 yd³ larger-bucket than 87% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | SAA6D114 E-2 | |
| Gross Power | 208hp | 155.2kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 687.5lb ft | 932Nm |
| Displacement | 504.7cu in | 8.3L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharger |
02 Operational Specification
| Operating Weight | 42031.2lb | 19065kg |
|---|---|---|
| Fuel Capacity | 79.3gal | 300L |
| Hydraulic System Fluid Capacity | 34.1gal | 129L |
| Engine Oil Fluid Capacity | 8.5gal | 32L |
| Cooling System Fluid Capacity | 9.6gal | 36L |
| Transmission Fluid Capacity | 10.1gal | 38L |
| Front Axle/Diff Fluid Capacity | 10.1gal | 38L |
| Rear Axle/Diff Fluid Capacity | 10.1gal | 38L |
| Static Tipping Weight | 34226.8lb | 15525kg |
| Turning Radius | 19.8ft in | 6035mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Tire Size | 23.5 R25 - 750/65 R25 |
03 Transmission Specification
| Transmission Type | Automatic powershift transmission | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24mph | 38.5km/h |
| Max Speed - Reverse | 24.7mph | 39.6km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3045.8psi | 21000kPa |
|---|---|---|
| Pump Flow Capacity | 79.8gal/min | 302L/min |
| Raise Time | 5.3sec | |
| Dump Time | 1.2sec | |
| Lower Time | 2.7sec | |
| Pump Type | gear pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.8ft in | 2985mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.32yd3 | 3.3m3 |
| Bucket Width | 9.85ft in | 3000mm |
| Breakout Force | 36508.97lb | 162.4kN |
06 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 459mm |
|---|---|---|
| Length With Bucket On Ground | 27.1ft in | 8259mm |
| Width Over Tires | 9.63ft in | 2935mm |
| Height To Top Of Cab | 11.11ft in | 3384mm |
| Wheelbase | 10.83ft in | 3300mm |
| Hinge Pin - Max Height | 13.63ft in | 4154mm |
| Reach At Max Lift And Dump | 3.66ft in | 1115mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.