Specification sheet Wheel Loader Ref komatsu-w90-3-wheel-loader

Komatsu W90-3

The Komatsu W90-3 is a wheel loader with an operating weight of 27,116.86 lb (12,300 kg), a 157 hp engine, and a 3.01 yd³ (2.3 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
27,116.86lb
12,300kg
Engine power
157hp
117.08kW
Gross Power
Bucket capacity
3.01yd³
2.3m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu W90-3 sits below the median for its class:

  • Operating weight 27,120 lb lighter than 72% (n=439)
  • Engine power 157 hp less powerful than 57% (n=408)
  • Bucket capacity 3 yd³ smaller-bucket than 60% (n=387)

Scale drawingdrawn to scale · mm

3240B435C6870A
Side elevation
3240B2515D
Front elevation

01 Engine Specification

Engine Make 2238
Engine Model S6D105
Gross Power 157hp 117.1kw
Displacement 396cu in 6.5L
Aspiration turbocharged

02 Operational Specification

Operating Weight 27116.9lb 12300kg
Fuel Capacity 59.8gal 226L
Cooling System Fluid Capacity 10.1gal 38L
Static Tipping Weight 21384.9lb 9700kg
Turning Radius 20.8ft in 6320mm
Rear Axle Oscillation 24degrees
Tire Size 20.5-25-12PR (L-3)

03 Transmission Specification

Transmission Type TORQFLOW full power shift coutnershaft type full soft shift
Number Of Forward Gears 3
Number Of Reverse Gears 3
Max Speed - Forward 18.9mph 30.4km/h
Max Speed - Reverse 20.1mph 32.3km/h

04 Hydraulic System Specification

Raise Time 5.3sec
Dump Time 2.5sec
Lower Time 2.5sec

05 Bucket Dimensions

Dump Clearance At Max Raise 9.19ft in 2800mm
Bucket Capacity - Heaped 3.01yd3 2.3m3
Bucket Width 8.58ft in 2615mm
Breakout Force 26230lb 116.6kN

06 Dimensions Dimensions

Ground Clearance 1.43ft in 435mm
Length With Bucket On Ground 22.54ft in 6870mm
Width Over Tires 8.26ft in 2515mm
Height To Top Of Cab 10.63ft in 3240mm
Wheelbase 9.42ft in 2870mm
Hinge Pin - Max Height 12.24ft in 3730mm
Reach At Max Lift And Dump 3.24ft in 985mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.