Specification sheet Wheel Loader Ref komatsu-w70-3-wheel-loader

Komatsu W70-3

The Komatsu W70-3 is a wheel loader with an operating weight of 20,789.6 lb (9,430 kg), a 107 hp engine, and a 2.23 yd³ (1.7 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
20,789.6lb
9,430kg
Engine power
107hp
79.79kW
Gross Power
Bucket capacity
2.23yd³
1.7m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Komatsu W70-3 sits at the heavy end of its class:

  • Operating weight 20,790 lb heavier than 93% (n=374)
  • Engine power 107 hp more powerful than 86% (n=367)
  • Bucket capacity 2.2 yd³ larger-bucket than 89% (n=309)

Scale drawingdrawn to scale · mm

3095B395C6530A
Side elevation
3095B2370D
Front elevation

01 Engine Specification

Engine Make 2238
Engine Model 6D105
Gross Power 107hp 79.8kw
Displacement 396cu in 6.5L

02 Operational Specification

Operating Weight 20789.6lb 9430kg
Fuel Capacity 45.5gal 172L
Cooling System Fluid Capacity 9.3gal 35L
Static Tipping Weight 14991.5lb 6800kg
Turning Radius 18.1ft in 5500mm
Rear Axle Oscillation 30degrees
Tire Size 17.5-25 12PR (L-2)

03 Transmission Specification

Transmission Type full powershift countershaft, soft shift
Number Of Forward Gears 3
Number Of Reverse Gears 3
Max Speed - Forward 21.5mph 34.5km/h
Max Speed - Reverse 21.5mph 34.5km/h

04 Bucket Dimensions

Dump Clearance At Max Raise 9.11ft in 2775mm
Bucket Capacity - Heaped 2.23yd3 1.7m3
Bucket Width 8.01ft in 2440mm
Breakout Force 19380lb 86.3kN

05 Dimensions Dimensions

Ground Clearance 1.3ft in 395mm
Length With Bucket On Ground 21.43ft in 6530mm
Width Over Tires 7.78ft in 2370mm
Height To Top Of Cab 10.16ft in 3095mm
Wheelbase 9.01ft in 2745mm
Hinge Pin - Max Height 11.82ft in 3600mm
Reach At Max Lift And Dump 3.34ft in 1015mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.