Specification sheet Wheel Loader Ref komatsu-w30-wheel-loader
Komatsu W30
The Komatsu W30 is a wheel loader with an operating weight of 10,317.64 lb (4,680 kg), a 49 hp engine, and a 1.05 yd³ (0.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,317.64lb
4,680kg
Engine power
49hp
36.54kW
Gross Power Bucket capacity
1.05yd³
0.8m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu W30 sits below the median for its class:
- Operating weight 10,320 lb lighter than 71% (n=374)
- Engine power 49 hp less powerful than 82% (n=367)
- Bucket capacity 1.1 yd³ smaller-bucket than 76% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2238 | |
|---|---|---|
| Engine Model | 4D94 | |
| Gross Power | 49hp | 36.6kw |
| Displacement | 179.5cu in | 3L |
02 Operational Specification
| Operating Weight | 10317.7lb | 4680kg |
|---|---|---|
| Fuel Capacity | 15.9gal | 60L |
| Cooling System Fluid Capacity | 3.2gal | 12L |
| Static Tipping Weight | 6481.6lb | 2940kg |
| Turning Radius | 14.3ft in | 4350mm |
| Tire Size | 42x17-20-10PR (L-2) |
03 Transmission Specification
| Transmission Type | TORQFLOW full powershift countershaft | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 1 | |
| Max Speed - Forward | 15.6mph | 25km/h |
| Max Speed - Reverse | 6.3mph | 10km/h |
04 Hydraulic System Specification
| Raise Time | 5.6sec | |
|---|---|---|
| Dump Time | 1.9sec | |
| Lower Time | 4sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.88ft in | 2400mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.05yd3 | 0.8m3 |
| Bucket Width | 6.4ft in | 1950mm |
| Breakout Force | 7610lb | 33.8kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 15.52ft in | 4730mm |
|---|---|---|
| Width Over Tires | 6.11ft in | 1860mm |
| Height To Top Of Cab | 9.36ft in | 2850mm |
| Wheelbase | 7.06ft in | 2150mm |
| Hinge Pin - Max Height | 9.95ft in | 3030mm |
| Reach At Max Lift And Dump | 3.02ft in | 920mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.