Specification sheet Wheel Loader Ref komatsu-w20-1-wheel-loader
Komatsu W20-1
The Komatsu W20-1 is a wheel loader with an operating weight of 8,770 lb (3,978.01 kg), a 49 hp engine, and a 0.79 yd³ (0.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,770lb
3,978.01kg
Engine power
49hp
36.54kW
Gross Power Bucket capacity
0.79yd³
0.6m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Komatsu W20-1 sits below the median for its class:
- Operating weight 8,770 lb lighter than 83% (n=374)
- Engine power 49 hp less powerful than 82% (n=367)
- Bucket capacity 0.8 yd³ smaller-bucket than 89% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2238 | |
|---|---|---|
| Engine Model | 4D94 | |
| Gross Power | 49hp | 36.6kw |
| Displacement | 179.5cu in | 3L |
02 Operational Specification
| Operating Weight | 8770lb | 3978.1kg |
|---|---|---|
| Fuel Capacity | 15.9gal | 60L |
| Cooling System Fluid Capacity | 3.2gal | 12L |
| Static Tipping Weight | 5291.1lb | 2400kg |
| Turning Radius | 14ft in | 4255mm |
| Tire Size | 10.20-10PR (L-2) |
03 Transmission Specification
| Transmission Type | TORQFLOW full power shift countershaft | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 1 | |
| Max Speed - Forward | 15.6mph | 25km/h |
| Max Speed - Reverse | 6.3mph | 10km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 7.39ft in | 2250mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.79yd3 | 0.6m3 |
| Bucket Width | 6.24ft in | 1900mm |
| Breakout Force | 6940lb | 30.9kN |
05 Dimensions Dimensions
| Length With Bucket On Ground | 14.72ft in | 4485mm |
|---|---|---|
| Width Over Tires | 5.84ft in | 1780mm |
| Height To Top Of Cab | 9.34ft in | 2845mm |
| Wheelbase | 7.06ft in | 2150mm |
| Hinge Pin - Max Height | 9.34ft in | 2845mm |
| Reach At Max Lift And Dump | 2.96ft in | 900mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.