Specification sheet Wheel Loader Ref komatsu-w180-1-wheel-loader
Komatsu W180-1
The Komatsu W180-1 is a wheel loader with an operating weight of 52,646.4 lb (23,880 kg), a 280 hp engine, and a 5.24 yd³ (4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
52,646.4lb
23,880kg
Engine power
280hp
208.8kW
Gross Power Bucket capacity
5.24yd³
4m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Komatsu W180-1 sits in the middle of its class:
- Operating weight 52,650 lb lighter than 52% (n=198)
- Engine power 280 hp more powerful than 54% (n=190)
- Bucket capacity 5.2 yd³ smaller-bucket than 72% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2238 | |
|---|---|---|
| Engine Model | Cummins NT855 | |
| Gross Power | 280hp | 208.8kw |
| Displacement | 854cu in | 14L |
02 Operational Specification
| Operating Weight | 52646.4lb | 23880kg |
|---|---|---|
| Fuel Capacity | 113.6gal | 430L |
| Cooling System Fluid Capacity | 22.8gal | 86L |
| Static Tipping Weight | 42549.3lb | 19300kg |
| Turning Radius | 25.9ft in | 7870mm |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 29.5-25-22PR (L-3) |
03 Transmission Specification
| Transmission Type | TORQFLOW countershaft full soft-shift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 20.2mph | 32.5km/h |
| Max Speed - Reverse | 20.2mph | 32.5km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 10.13ft in | 3085mm |
|---|---|---|
| Bucket Capacity - Heaped | 5.24yd3 | 4m3 |
| Bucket Width | 10.83ft in | 3300mm |
| Breakout Force | 26060lb | 26060- |
05 Dimensions Dimensions
| Ground Clearance | 1.56ft in | 475mm |
|---|---|---|
| Length With Bucket On Ground | 27.71ft in | 8445mm |
| Width Over Tires | 10.09ft in | 3075mm |
| Height To Top Of Cab | 11.98ft in | 3650mm |
| Wheelbase | 11.65ft in | 3550mm |
| Hinge Pin - Max Height | 13.95ft in | 4250mm |
| Reach At Max Lift And Dump | 4.24ft in | 1290mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.