Specification sheet Wheel Loader Ref komatsu-w170-2-wheel-loader
Komatsu W170-2
The Komatsu W170-2 is a wheel loader with an operating weight of 42,593.32 lb (19,320 kg), a 235 hp engine, and a 4.58 yd³ (3.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
42,593.32lb
19,320kg
Engine power
235hp
175.24kW
Gross Power Bucket capacity
4.58yd³
3.5m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Komatsu W170-2 sits at the heavy end of its class:
- Operating weight 42,590 lb heavier than 94% (n=439)
- Engine power 235 hp more powerful than 96% (n=408)
- Bucket capacity 4.6 yd³ larger-bucket than 92% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2238 | |
|---|---|---|
| Engine Model | -Cummins NT855 | |
| Gross Power | 235hp | 175.3kw |
| Displacement | 855cu in | 14.1L |
02 Operational Specification
| Operating Weight | 42593.4lb | 19320kg |
|---|---|---|
| Fuel Capacity | 99.1gal | 375L |
| Cooling System Fluid Capacity | 16.2gal | 61L |
| Static Tipping Weight | 32848.9lb | 14900kg |
| Turning Radius | 24.1ft in | 7340mm |
| Tire Size | 23.5-25 20PR (L-3) |
03 Transmission Specification
| Transmission Type | full powershift countershaft | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 20.7mph | 33.2km/h |
| Max Speed - Reverse | 20.7mph | 33.2km/h |
04 Hydraulic System Specification
| Raise Time | 6.8sec | |
|---|---|---|
| Dump Time | 1.9sec | |
| Lower Time | 3.5sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.04ft in | 3060mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.58yd3 | 3.5m3 |
| Bucket Width | 10.01ft in | 3050mm |
| Breakout Force | 45810lb | 204kN |
06 Dimensions Dimensions
| Ground Clearance | 1.24ft in | 375mm |
|---|---|---|
| Length With Bucket On Ground | 26.88ft in | 8190mm |
| Width Over Tires | 9.49ft in | 2890mm |
| Height To Top Of Cab | 11.73ft in | 3575mm |
| Wheelbase | 11ft in | 3350mm |
| Hinge Pin - Max Height | 13.62ft in | 4150mm |
| Reach At Max Lift And Dump | 3.97ft in | 1210mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.