Specification sheet Skid Steer Loader Ref komatsu-sk1026-5-skid-steer-loader
Komatsu SK1026-5
The Komatsu SK1026-5 is a skid steer loader with an operating weight of 7,572.88 lb (3,435 kg), a 84 hp engine, a rated operating capacity of 2,656.58 lb (1,205 kg), and a 0.7 yd³ (0.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,572.88lb
3,435kg
Engine power
84hp
62.64kW
Net Power Rated operating capacity
2,656.58lb
1,205kg
Bucket capacity
0.7yd³
0.5m³
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Komatsu SK1026-5 sits above the median for its class:
- Operating weight 7,570 lb heavier than 70% (n=334)
- Engine power 84 hp more powerful than 87% (n=335)
- Rated operating capacity 2,660 lb higher-rated than 84% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | 4D98E-2NFD | |
| Net Power | 84hp | 62.7kw |
| Power Measured @ | 2500rpm | |
| Aspiration | natural | |
| Displacement | 207.5cu in | 3.4L |
02 Operational Specification
| Operational Weight | 7572.9lb | 3435kg |
|---|---|---|
| Fuel Capacity | 19.3gal | 73L |
| Cooling System Fluid Capacity | 2.2gal | 8L |
| Engine Oil Fluid Capacity | 3.4gal | 12.5L |
| Max Speed | 10mph | 16km/h |
| Hydraulic System Fluid Capacity | 13.3gal | 50L |
| Chain Box Fluid Capacity - Each Side | 8.5gal | 32L |
| Operating Speed | 6.3mph | 10km/h |
| Tire Size | 12-16.5 10PR | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps |
03 Loader Specification
| Breakout Force | 5401.4lb | 2450kg |
|---|---|---|
| Operating Load Rating | 2656.6lb | 1205kg |
| Bucket Capacity | 0.7yd3 | 0.5m3 |
04 Hydraulic Specification
| Pump Type | Komatsu closed load sensing system | |
|---|---|---|
| Pump Flow Capacity | 34.4gal/min | 130L/min |
| Relief Valve Pressure | 3045.8psi | 21000kPa |
05 Dimensions Dimensions
| Length With Bucket | 12.08ft in | 3680.46mm |
|---|---|---|
| Width Over Tires | 5.68ft in | 1730mm |
| Ground Clearance | 9.34in | 237mm |
| Height To Top Of Cab | 6.77ft in | 2062mm |
| Wheelbase | 3.82ft in | 1162mm |
| Clearance At Max Lift And Dump | 8.11ft in | 2470mm |
| Reach At Max Lift And Dump | 36.86in | 936mm |
| Turning Radius From Center - Machine Rear | 65.36in | 1660mm |
| Turning Radius From Center - Inc Bucket | 84.65in | 2150mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.