Komatsu PC35MR-2
The Komatsu PC35MR-2 is a mini excavator with an operating weight of 8,245 lb, a 29.1 hp engine, and a dig depth of 10.41 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Komatsu PC35MR-2 sits above the median for its class:
- Operating weight 8,250 lb heavier than 76% (n=438)
- Engine power 29 hp more powerful than 71% (n=448)
- Dig depth 10.4 ft deeper-digging than 70% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Reach Along Ground | 17.15ft in | 5,227mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Vertical Wall Digging Depth | 8.93ft in | 2,722mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 10.41ft in | 3,173mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 5.75ft in | 1,753mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 15.92ft in | 4,852mm‖ — metric converted from the published imperial value |
| Ground Clearance | 6.92ft in | 2,109mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.33ft in | 2,539mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.08ft in | 939mm‖ — metric converted from the published imperial value |
| Removal Counterweight Clearance | 15.92ft in | 4,852mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Number Of Carrier Rollers Per Side | 1 | |
|---|---|---|
| Number Of Track Rollers Per Side | 4 | |
| Max Travel Speed | 2.9mph | 4.7km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Engine Make | 2238 | |
|---|---|---|
| Engine Model | 3D88E-5 | |
| Gross Power | 29.1hp | 21.7kw‖ — metric converted from the published imperial value |
| Power Measured @ | 1.7rpm | |
| Displacement | 100cu in | 1,639cm3‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 8245lb | 3,740kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 11.6gal | 43.9l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 0.9gal | 3l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 8.7gal | 33l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 2gal | 8l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V |
06 Swing Mechanism Specification
| Swing Speed | 9rpm |
|---|
07 Buckets Specification
| Reference Bucket Capacity | 0.1yd3 | |
|---|---|---|
| Minimum Bucket Capacity | 0.1yd3 | |
| Maximum Bucket Capacity | 0.2yd3 |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.