Komatsu PC20MR-3
The Komatsu PC20MR-3 is a mini excavator with an operating weight of 4,762 lb.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Komatsu PC20MR-3 sits below the median for its class:
- Operating weight 4,760 lb lighter than 69% (n=438)
Not positioned on engine power, dig depth — withheld or unpublished for this machine.
01 Dimensions Specification
| Tail Swing Radius | 2.65ft in | 808mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Gauge | 3.94ft in | 1,201mm‖ — metric converted from the published imperial value |
| Bucket Offset Rh | 2.5ft in | 762mm‖ — metric converted from the published imperial value |
| Crawler Length | 6.17ft in | 1,881mm‖ — metric converted from the published imperial value |
| Boom Swing Angle Lh | 75degrees | |
| Boom Swing Angle Rh | 50degrees | |
| Bucket Offset Lh | 1.68ft in | 512mm‖ — metric converted from the published imperial value |
| Overall Height | 8.27ft in | 2,521mm‖ — metric converted from the published imperial value |
| Overall Width | 4.76ft in | 1,451mm‖ — metric converted from the published imperial value |
| Overall Length | 12.31ft in | 3,752mm‖ — metric converted from the published imperial value |
| Track Shoe Width | 15255.94ft in | 4,650,011mm‖ — metric converted from the published imperial value |
02 Undercarriage Specification
| Number Of Shoes Per Side | 39 | |
|---|---|---|
| Number Of Carrier Rollers Per Side | 0 | |
| Adjustment Of The Track Tension | Grease | |
| Number Of Track Rollers Per Side | 3 |
03 Electrical System Specification
| Starter | 1.4kW | |
|---|---|---|
| Operation Voltage | 12V | |
| Battery | 45Ah | |
| Alternator | 40A |
04 Engine Specification
| Flywheel Horsepower | 20.8hp | 15.5kw‖ — metric converted from the published imperial value |
|---|---|---|
| Piston Displacement | 68.1cu in | 1,116cm3‖ — metric converted from the published imperial value |
| Engine Model | Komatsu 3D76E-6 | |
| Engine Type | Swirl chamber | |
| Power Measured @ | 2500rpm |
05 Capacities Specification
| Fuel Tank | 7.4gal | 28l‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic Tank | 5.1gal | 19l‖ — metric converted from the published imperial value |
| Engine Oil | 0.9gal | 3l‖ — metric converted from the published imperial value |
| Coolant | 0.8gal | 3l‖ — metric converted from the published imperial value |
06 Performance Specification
| Travel Speed (Maximum) | 2.9mph | 4.7km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Travel Speed (Minimum) | 1.8mph | 2.9km/h‖ — metric converted from the published imperial value |
| Swing Speed | 8.9rpm | |
| Ground Pressure | 3.9psi | 27kpa‖ — metric converted from the published imperial value |
| Max. Traction Force | 4541.6lb | 2,060kg‖ — metric converted from the published imperial value |
| Gradeability | 30degrees | |
| Bucket Digging Force (Iso) | 4232.9lb | 1,920kg‖ — metric converted from the published imperial value |
| Arm Crowd Force (Iso) | 3064.5lb | 1,390kg‖ — metric converted from the published imperial value |
07 Weights Specification
| Operating Weight | 4762lb | 2,160kg‖ — metric converted from the published imperial value |
|---|
08 Hydraulic System Specification
| Type Of Hydraulic Pump | Variable capacity x 1 gear x 1 | |
|---|---|---|
| Max. Oil Flow | 53.4 x 1 + 15.5 14.1 x 1 + 4.1 | |
| Hydraulic Motor (Travel) | Variable capacity x 2 | |
| Hydraulic Motor (Swing) | fixed capacity x 1 | |
| Max. Pressure Setting | 3560psi | 24,545kpa‖ — metric converted from the published imperial value |
| Auxiliary Hydraulic Flow | 9.3gal/min | 35l/min‖ — metric converted from the published imperial value |
09 Blade Specification
| Blade Width | 4.8ft in | 1,463mm‖ — metric converted from the published imperial value |
|---|---|---|
| Blade Height | 11.9in | 302mm‖ — metric converted from the published imperial value |
10 Drive System Specification
| Drive Method | Hydrostatic | |
|---|---|---|
| Type Of Travel Brake | Hydraulic lock type | |
| Type Of Travel Shoe | Rubber |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.