Komatsu PC09-1
The Komatsu PC09-1 is a mini excavator with an operating weight of 2,072.4 lb, and a dig depth of 4.93 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Komatsu PC09-1 sits at the compact end of its class:
- Operating weight 2,070 lb lighter than 97% (n=438)
- Dig depth 4.9 ft shallower-digging than 100% (n=426)
Not positioned on engine power — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Max Vertical Wall Digging Depth | 3.84ft in | 1,170mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Digging Depth | 4.93ft in | 1,503mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 2.63ft in | 802mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 5.58ft in | 1,701mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 6.89ft in | 2,100mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.6ft in | 792mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Max Travel Speed | 1.87mph | 3.01km/h‖ — metric converted from the published imperial value |
|---|
04 Engine Specification
| Number Of Cylinders | 2 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | 2D70E | |
| Displacement | 34.7cu in | 569cm3‖ — metric converted from the published imperial value |
| Aspiration | Water-cooled 4 cycle turbulence chamber |
05 Operational Specification
| Operating Weight | 2072.4lb | 940.02kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 3gal | 11l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 0.6gal | 2l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 2.4gal | 9.1l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 0.5gal | 2l‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 8.3rpm |
|---|
07 Buckets Specification
| Reference Bucket Capacity | 0.1yd3 | |
|---|---|---|
| Minimum Bucket Capacity | 0.1yd3 | |
| Maximum Bucket Capacity | 0.1yd3 |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.