Specification sheet Compact Track Loader Ref komatsu-ck35-1-multi-terrain-loader
Komatsu CK35-1
The Komatsu CK35-1 is a compact track loader with an operating weight of 9,546.02 lb (4,330 kg), a 84 hp engine, a rated operating capacity of 2,755.78 lb (1,250 kg), and a 0.7 yd³ (0.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,546.02lb
4,330kg
Engine power
84hp
62.64kW
Net Power Rated operating capacity
2,755.78lb
1,250kg
Bucket capacity
0.7yd³
0.5m³
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Komatsu CK35-1 sits in the middle of its class:
- Operating weight 9,550 lb heavier than 53% (n=182)
- Engine power 84 hp more powerful than 78% (n=167)
- Rated operating capacity 2,760 lb higher-rated than 53% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | S4D98E-2NFE | |
| Net Power | 84hp | 62.7kw |
| Power Measured @ | 2500rpm | |
| Peak Torque | 211lb ft | 286Nm |
| Torque Measured @ | 1600rpm | |
| Displacement | 207.5cu in | 3.4L |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 9546.1lb | 4330kg |
|---|---|---|
| Cooling System Fluid Capacity | 2.2gal | 8L |
| Fuel Capacity | 17gal | 64L |
| Engine Oil Capacity | 3.4gal | 12.5L |
| Hydraulic System Fluid Capacity | 10.1gal | 38L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps | |
| Max Speed - Low Range | 4.6mph | 7.3km/h |
| Max Speed - High Range | 7.5mph | 12km/h |
03 Loader Specification
| Operating Load | 2755.8lb | 1250kg |
|---|---|---|
| Bucket Capacity | 0.7yd3 | 0.5m3 |
04 Hydraulic Specification
| Pump Type | komatsu closed load sensing system | |
|---|---|---|
| Pump Flow | 21.2gal/min | 80L/min |
| Relief Valve Pressure | 3045psi | 20994.6kPa |
05 Dimensions Dimensions
| Width Over Tracks | 6.67ft in | 2030mm |
|---|---|---|
| Height To Top Of Cab | 6.99ft in | 2130mm |
| Clearance At Max Lift And Dump | 11.73ft in | 3575mm |
| Reach At Max Lift And Dump | 2.86ft in | 870mm |
| Turning Radius From Center - Inc Bucket | 88.78in | 2255mm |
| Turning Radius From Center - Machine Rear | 62.6in | 1590mm |
| Length With Bucket | 11.65ft in | 3550mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.