Specification sheet Compact Track Loader Ref komatsu-ck30-1-multi-terrain-loader

Komatsu CK30-1

The Komatsu CK30-1 is a compact track loader with an operating weight of 9,546.02 lb (4,330 kg), a 84 hp engine, a rated operating capacity of 3,549.45 lb (1,610 kg), and a tipping load of 7,098.9 lb (3,220.01 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
9,546.02lb
4,330kg
Engine power
84hp
62.64kW
Net Power
Rated operating capacity
3,549.45lb
1,610kg
Tipping load
7,098.9lb † — value reconstructed from related published figures
3,220.01kg
Bucket capacity
0.6yd³
0.5m³

◆Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Komatsu CK30-1 sits in the middle of its class:

  • Operating weight 9,550 lb heavier than 53% (n=182)
  • Engine power 84 hp more powerful than 78% (n=167)
  • Rated operating capacity 3,550 lb higher-rated than 81% (n=156)

◇Scale drawingdrawn to scale · mm

2130B3550A
Side elevation
2130B2030C
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2238
Engine Model S4D98E-2NFE
Net Power 84hp 62.7kw
Power Measured @ 2500rpm
Peak Torque 211lb ft 286Nm
Torque Measured @ 1600rpm
Displacement 207.5cu in 3.4L
Aspiration turbocharged

02 Operational Specification

Operating Weight 9546.1lb 4330kg
Cooling System Fluid Capacity 2.2gal 8L
Fuel Capacity 19.3gal 73L
Engine Oil Capacity 3.4gal 12.5L
Hydraulic System Fluid Capacity 10.1gal 38L
Operating Voltage 12V
Alternator Supplied Amperage 40amps
Max Speed - Low Range 4.7mph 7.5km/h
Max Speed - High Range 7.5mph 12km/h

03 Loader Specification

Breakout Force 5048.6lb 2290kg
Operating Load 3549.5lb 1610kg
Bucket Capacity 0.6yd3 0.5m3

04 Hydraulic Specification

Pump Type komatsu closed load sensing system
Pump Flow 21.2gal/min 80L/min
Relief Valve Pressure 3045psi 20994.6kPa

05 Dimensions Dimensions

Width Over Tracks 6.67ft in 2030mm
Height To Top Of Cab 6.99ft in 2130mm
Clearance At Max Lift And Dump 7.58ft in 2310mm
Reach At Max Lift And Dump 2.04ft in 620mm
Length With Bucket 11.65ft in 3550mm
Turning Radius From Center - Inc Bucket 88.78in 2255mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.