Kobelco SK45SRX-6E
The Kobelco SK45SRX-6E is a mini excavator with an operating weight of 10,300 lb, a 37.4 hp engine, and a dig depth of 11.3 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Kobelco SK45SRX-6E sits at the heavy end of its class:
- Operating weight 10,300 lb heavier than 89% (n=438)
- Engine power 37 hp more powerful than 79% (n=448)
- Dig depth 11.3 ft deeper-digging than 86% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 17.4ft in | 5,304mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 18.7ft in | 5,700mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.4ft in | 2,560mm‖ — metric converted from the published imperial value |
| Max Loading Height | 13.5ft in | 4,115mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 18.8ft in | 5,730mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 9.31ft in | 2,838mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.3ft in | 3,444mm‖ — metric converted from the published imperial value |
| Arm Crowding Force - Sae | 4473.7lb | 2,029.2kg‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Mono Boom | |
| Bucket Digging Force - Sae | 6991.56lb | 3,171.32kg‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 6.5ft in | 1,981mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 17.4ft in | 5,304mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.4ft in | 2,560mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.1ft in | 945mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 15.7in | 399mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Pressure | 3.81psi | 26.3kpa‖ — metric converted from the published imperial value |
| Number Of Track Rollers Per Side | 5 | |
| Max Travel Speed | 2.5mph | 4km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | YANMAR 4TNV88C-PYB | |
| Engine Type | Water cooled, 4-cycle, 4-cylinder, direct injection, diesel engine | |
| Net Power | 37.4hp | 27.9kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2400rpm | |
| Displacement | 133.6cu in | 2,189cm3‖ — metric converted from the published imperial value |
| Max Torque | 97.3lb ft | |
| Torque Measured @ | 1560rpm |
05 Operational Specification
| Operating Weight | 10300lb | 4,672kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 19.9gal | 75.3l‖ — metric converted from the published imperial value |
| Traction Force | 12390lb | 5,620kg‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Motor | Axial piston motor | |
|---|---|---|
| Swing Speed | 8.5rpm |
07 Buckets Specification
| Reference Bucket Capacity | 0.1yd3 |
|---|
08 Hydraulic System Specification
| Relief Valve Setting | 3,335 (23.0) (psi (MPa)) | |
|---|---|---|
| Max. Oil Flow | 2 x 13.2 (49.9), 8.9 (33.8), 2.9 (10.8) (gal/min (L/min)) | |
| Pump Type | Two variable displacement pumps+ two gear pumps |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.