Specification sheet Wheel Loader Ref kawasaki-95zv-2-wheel-loader
Kawasaki 95ZV-2
The Kawasaki 95ZV-2 is a wheel loader with an operating weight of 68,170 lb (30,921.4 kg), a 348 hp engine, and a 7.07 yd³ (5.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
68,170lb
30,921.4kg
Engine power
348hp
259.6kW
Net Power Bucket capacity
7.07yd³
5.4m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Kawasaki 95ZV-2 sits at the heavy end of its class:
- Operating weight 68,170 lb heavier than 90% (n=198)
- Engine power 348 hp more powerful than 92% (n=190)
- Bucket capacity 7.1 yd³ larger-bucket than 89% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSX15 | |
| Net Power | 348hp | 259.6kw |
| Gross Power | 390hp | 290.9kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 1346lb ft | 1825Nm |
| Displacement | 917cu in | 15.1L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 68170lb | 30921.4kg |
|---|---|---|
| Fuel Capacity | 122.9gal | 465L |
| Hydraulic System Fluid Capacity | 70.1gal | 265L |
| Engine Oil Fluid Capacity | 13.3gal | 50L |
| Cooling System Fluid Capacity | 26.5gal | 100L |
| Transmission Fluid Capacity | 17.2gal | 65L |
| Front Axle/Diff Fluid Capacity | 26.5gal | 100L |
| Rear Axle/Diff Fluid Capacity | 26.5gal | 100L |
| Static Tipping Weight | 53418.1lb | 24230kg |
| Turning Radius | 23.9ft in | 7275mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 29.5x25-22PR (L-3) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.3mph | 37.5km/h |
| Max Speed - Reverse | 16.2mph | 26.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 50.2gal/min | 190.1L/min |
| Raise Time | 6.1sec | |
| Dump Time | 1.5sec | |
| Lower Time | 4sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.57ft in | 3220mm |
|---|---|---|
| Bucket Capacity - Heaped | 7.07yd3 | 5.4m3 |
| Bucket Capacity - Struck | 5.76yd3 | 4.41m3 |
| Bucket Width | 11.32ft in | 3450mm |
| Breakout Force | 55120lb | 245.19kN |
06 Dimensions Dimensions
| Ground Clearance | 1.65ft in | 500mm |
|---|---|---|
| Length With Bucket On Ground | 30.45ft in | 9280mm |
| Width Over Tires | 10.57ft in | 3220mm |
| Height To Top Of Cab | 12.34ft in | 3760mm |
| Wheelbase | 11.82ft in | 3600mm |
| Hinge Pin - Max Height | 14.74ft in | 4490mm |
| Reach At Max Lift And Dump | 4.43ft in | 1350mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.