Specification sheet Wheel Loader Ref kawasaki-95ziv-wheel-loader
Kawasaki 95ZIV
The Kawasaki 95ZIV is a wheel loader with an operating weight of 63,669.5 lb (28,880 kg), a 315 hp engine, and a 6.54 yd³ (5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
63,669.5lb
28,880kg
Engine power
315hp
234.9kW
Net Power Bucket capacity
6.54yd³
5m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Kawasaki 95ZIV sits above the median for its class:
- Operating weight 63,670 lb heavier than 76% (n=198)
- Engine power 315 hp more powerful than 74% (n=190)
- Bucket capacity 6.5 yd³ larger-bucket than 80% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | N14-C | |
| Net Power | 315hp | 234.9kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 980lb ft | 1328.8Nm |
| Displacement | 855cu in | 14.1L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged & after cooled |
02 Operational Specification
| Operating Weight | 63669.5lb | 28880kg |
|---|---|---|
| Fuel Capacity | 107gal | 405L |
| Hydraulic System Fluid Capacity | 68.7gal | 260L |
| Engine Oil Fluid Capacity | 11.4gal | 43L |
| Cooling System Fluid Capacity | 22.5gal | 85L |
| Transmission Fluid Capacity | 17.2gal | 65L |
| Front Axle/Diff Fluid Capacity | 26.5gal | 100L |
| Rear Axle/Diff Fluid Capacity | 26.5gal | 100L |
| Static Tipping Weight | 48678.1lb | 22080kg |
| Turning Radius | 23.9ft in | 7275mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 29.5x25-22PR |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.8mph | 35.1km/h |
| Max Speed - Reverse | 14.6mph | 23.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 50gal/min | 189.3L/min |
| Raise Time | 7sec | |
| Dump Time | 1.5sec | |
| Lower Time | 4sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.57ft in | 3220mm |
|---|---|---|
| Bucket Capacity - Heaped | 6.54yd3 | 5m3 |
| Bucket Capacity - Struck | 5.5yd3 | 4.2m3 |
| Bucket Width | 11.32ft in | 3450mm |
| Breakout Force | 54670lb | 243.19kN |
06 Dimensions Dimensions
| Ground Clearance | 1.65ft in | 500mm |
|---|---|---|
| Length With Bucket On Ground | 30.22ft in | 9210mm |
| Width Over Tires | 10.5ft in | 3200mm |
| Height To Top Of Cab | 12.7ft in | 3870mm |
| Wheelbase | 11.68ft in | 3560mm |
| Hinge Pin - Max Height | 14.74ft in | 4490mm |
| Reach At Max Lift And Dump | 4.43ft in | 1350mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.