Specification sheet Wheel Loader Ref kawasaki-95ziii-wheel-loader
Kawasaki 95ZIII
The Kawasaki 95ZIII is a wheel loader with an operating weight of 62,401.84 lb (28,305 kg), a 310 hp engine, and a 6.41 yd³ (4.91 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
62,401.84lb
28,305kg
Engine power
310hp
231.2kW
Net Power Bucket capacity
6.41yd³
4.91m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Kawasaki 95ZIII sits above the median for its class:
- Operating weight 62,400 lb heavier than 73% (n=198)
- Engine power 310 hp more powerful than 72% (n=190)
- Bucket capacity 6.4 yd³ larger-bucket than 79% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | NTA-855-C 335 | |
| Net Power | 310hp | 231.2kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 1005lb ft | 1362.6Nm |
| Displacement | 855cu in | 14.1L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged & air cooled |
02 Operational Specification
| Operating Weight | 62401.9lb | 28305kg |
|---|---|---|
| Fuel Capacity | 107gal | 405L |
| Hydraulic System Fluid Capacity | 108.4gal | 410L |
| Engine Oil Fluid Capacity | 11.4gal | 43L |
| Cooling System Fluid Capacity | 22.5gal | 85L |
| Transmission Fluid Capacity | 17.2gal | 65L |
| Front Axle/Diff Fluid Capacity | 26.5gal | 100L |
| Rear Axle/Diff Fluid Capacity | 26.5gal | 100L |
| Static Tipping Weight | 44577.5lb | 20220kg |
| Turning Radius | 23.9ft in | 7275mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 29.5-25-22PR (L3) |
03 Transmission Specification
| Transmission Type | full power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.7mph | 36.6km/h |
| Max Speed - Reverse | 15.1mph | 24.4km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 50gal/min | 189.3L/min |
| Raise Time | 7.3sec | |
| Dump Time | 1.7sec | |
| Lower Time | 3.5sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.5ft in | 3200mm |
|---|---|---|
| Bucket Capacity - Heaped | 6.41yd3 | 4.91m3 |
| Bucket Capacity - Struck | 5.5yd3 | 4.2m3 |
| Bucket Width | 11.32ft in | 3450mm |
| Breakout Force | 5348204.3lb | 23790kN |
06 Dimensions Dimensions
| Ground Clearance | 1.61ft in | 490mm |
|---|---|---|
| Length With Bucket On Ground | 29.38ft in | 8955mm |
| Width Over Tires | 10.47ft in | 3190mm |
| Height To Top Of Cab | 12.67ft in | 3860mm |
| Wheelbase | 11.68ft in | 3560mm |
| Hinge Pin - Max Height | 14.67ft in | 4470mm |
| Reach At Max Lift And Dump | 4.45ft in | 1355mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.