Specification sheet Wheel Loader Ref kawasaki-95zii-wheel-loader
Kawasaki 95ZII
The Kawasaki 95ZII is a wheel loader with an operating weight of 61,840 lb (28,050.16 kg), a 310 hp engine, and a 6.22 yd³ (4.75 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
61,840lb
28,050.16kg
Engine power
310hp
231.17kW
Gross Power Bucket capacity
6.22yd³
4.75m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Kawasaki 95ZII sits above the median for its class:
- Operating weight 61,840 lb heavier than 72% (n=198)
- Engine power 310 hp more powerful than 72% (n=190)
- Bucket capacity 6.2 yd³ larger-bucket than 72% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | NTA-855-C335 | |
| Gross Power | 310hp | 231.2kw |
| Power Measured @ | 2100rpm | |
| Displacement | 885cu in | 14.6L |
| Aspiration | turbocharged & after cooled |
02 Operational Specification
| Operating Weight | 61840lb | 28050.2kg |
|---|---|---|
| Fuel Capacity | 113.6gal | 430L |
| Hydraulic System Fluid Capacity | 95.2gal | 360L |
| Engine Oil Fluid Capacity | 11.4gal | 43L |
| Cooling System Fluid Capacity | 22.5gal | 85L |
| Transmission Fluid Capacity | 15.9gal | 60L |
| Front Axle/Diff Fluid Capacity | 19.1gal | 72L |
| Rear Axle/Diff Fluid Capacity | 19.1gal | 72L |
| Static Tipping Weight | 40120lb | 18198.2kg |
| Turning Radius | 25.4ft in | 7725mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 26.5-25-24PR (L3) |
03 Transmission Specification
| Transmission Type | power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 21.4mph | 34.5km/h |
| Max Speed - Reverse | 12mph | 19.4km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2490psi | 17168kPa |
|---|---|---|
| Pump Flow Capacity | 44.1gal/min | 167L/min |
| Raise Time | 6.7sec | |
| Dump Time | 1.3sec | |
| Lower Time | 4.1sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.06ft in | 3065mm |
|---|---|---|
| Bucket Capacity - Heaped | 6.22yd3 | 4.75m3 |
| Bucket Capacity - Struck | 5.56yd3 | 4.25m3 |
| Bucket Width | 11.32ft in | 3450mm |
| Breakout Force | 50550lb | 224.86kN |
06 Dimensions Dimensions
| Ground Clearance | 1.48ft in | 450mm |
|---|---|---|
| Length With Bucket On Ground | 28.25ft in | 8610mm |
| Width Over Tires | 10.21ft in | 3110mm |
| Height To Top Of Cab | 12.64ft in | 3850mm |
| Wheelbase | 11.55ft in | 3520mm |
| Hinge Pin - Max Height | 14.28ft in | 4350mm |
| Reach At Max Lift And Dump | 4.86ft in | 1480mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.