Specification sheet Wheel Loader Ref kawasaki-92zv-2-wheel-loader
Kawasaki 92ZV-2
The Kawasaki 92ZV-2 is a wheel loader with an operating weight of 58,025 lb (26,319.7 kg), a 284 hp engine, and a 6 yd³ (4.59 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
58,025lb
26,319.7kg
Engine power
284hp
211.8kW
Net Power Bucket capacity
6yd³
4.59m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Kawasaki 92ZV-2 sits above the median for its class:
- Operating weight 58,030 lb heavier than 65% (n=198)
- Engine power 284 hp more powerful than 56% (n=190)
- Bucket capacity 6 yd³ larger-bucket than 66% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSM11 | |
| Net Power | 284hp | 211.8kw |
| Gross Power | 300hp | 223.8kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 1121lb ft | 1519.9Nm |
| Displacement | 660cu in | 10.9L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharged with Aftercooler | |
| Torque Rise | 47% |
02 Operational Specification
| Operating Weight | 58025lb | 26319.7kg |
|---|---|---|
| Fuel Capacity | 112.1gal | 424L |
| Hydraulic System Fluid Capacity | 68.2gal | 258L |
| Engine Oil Fluid Capacity | 9.8gal | 37L |
| Cooling System Fluid Capacity | 19.1gal | 72L |
| Transmission Fluid Capacity | 15.4gal | 58L |
| Front Axle/Diff Fluid Capacity | 20.9gal | 79L |
| Rear Axle/Diff Fluid Capacity | 22.5gal | 85L |
| Static Tipping Weight | 43560lb | 19758.5kg |
| Turning Radius | 19.8ft in | 6025mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 26.5-25-20PR |
03 Transmission Specification
| Transmission Type | Power Shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.9mph | 36.7km/h |
| Max Speed - Reverse | 23.8mph | 38.3km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 48.9gal/min | 185L/min |
| Raise Time | 6.4sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.3sec | |
| Pump Type | Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.68ft in | 3255mm |
|---|---|---|
| Bucket Capacity - Heaped | 6yd3 | 4.59m3 |
| Bucket Capacity - Struck | 5.2yd3 | 3.98m3 |
| Bucket Width | 10.41ft in | 3170mm |
| Breakout Force | 50900lb | 226.42kN |
06 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 460mm |
|---|---|---|
| Length With Bucket On Ground | 29.7ft in | 9050mm |
| Width Over Tires | 9.96ft in | 3035mm |
| Height To Top Of Cab | 11.65ft in | 3550mm |
| Wheelbase | 11.65ft in | 3550mm |
| Hinge Pin - Max Height | 14.83ft in | 4520mm |
| Reach At Max Lift And Dump | 4.24ft in | 1290mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.