Specification sheet Wheel Loader Ref kawasaki-90zv-2-wheel-loader
Kawasaki 90ZV-2
The Kawasaki 90ZV-2 is a wheel loader with an operating weight of 51,257 lb (23,249.79 kg), a 271 hp engine, and a 5.24 yd³ (4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
51,257lb
23,249.79kg
Engine power
271hp
202.1kW
Net Power Bucket capacity
5.24yd³
4m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Kawasaki 90ZV-2 sits below the median for its class:
- Operating weight 51,260 lb lighter than 65% (n=198)
- Engine power 271 hp less powerful than 56% (n=190)
- Bucket capacity 5.2 yd³ smaller-bucket than 72% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSM11 | |
| Net Power | 271hp | 202.1kw |
| Gross Power | 290hp | 216.3kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 1045lb ft | 1416.9Nm |
| Displacement | 660cu in | 10.9L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 51257lb | 23249.8kg |
|---|---|---|
| Fuel Capacity | 97.8gal | 370L |
| Hydraulic System Fluid Capacity | 68.7gal | 260L |
| Engine Oil Fluid Capacity | 9.7gal | 36.7L |
| Cooling System Fluid Capacity | 15.9gal | 60L |
| Transmission Fluid Capacity | 15.9gal | 60L |
| Front Axle/Diff Fluid Capacity | 19.6gal | 74L |
| Rear Axle/Diff Fluid Capacity | 21.2gal | 80L |
| Static Tipping Weight | 40333.6lb | 18295kg |
| Turning Radius | 22.5ft in | 6840mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 26.5x25-20PR (L-3) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 20.8mph | 33.5km/h |
| Max Speed - Reverse | 21.8mph | 35.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 37.8gal/min | 143.1L/min |
| Raise Time | 6.1sec | |
| Dump Time | 1.3sec | |
| Lower Time | 3sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.27ft in | 3130mm |
|---|---|---|
| Bucket Capacity - Heaped | 5.24yd3 | 4m3 |
| Bucket Capacity - Struck | 4.45yd3 | 3.4m3 |
| Bucket Width | 10.18ft in | 3100mm |
| Breakout Force | 46309lb | 206kN |
06 Dimensions Dimensions
| Ground Clearance | 1.69ft in | 515mm |
|---|---|---|
| Length With Bucket On Ground | 28.55ft in | 8700mm |
| Width Over Tires | 9.62ft in | 2930mm |
| Height To Top Of Cab | 11.6ft in | 3535mm |
| Wheelbase | 11.16ft in | 3400mm |
| Hinge Pin - Max Height | 14.31ft in | 4360mm |
| Reach At Max Lift And Dump | 3.88ft in | 1180mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.