Specification sheet Wheel Loader Ref kawasaki-85zv-2-wheel-loader
Kawasaki 85ZV-2
The Kawasaki 85ZV-2 is a wheel loader with an operating weight of 46,275 lb (20,989.99 kg), a 224 hp engine, and a 4.84 yd³ (3.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
46,275lb
20,989.99kg
Engine power
224hp
167.1kW
Net Power Bucket capacity
4.84yd³
3.7m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Kawasaki 85ZV-2 sits at the compact end of its class:
- Operating weight 46,280 lb lighter than 93% (n=198)
- Engine power 224 hp less powerful than 90% (n=190)
- Bucket capacity 4.8 yd³ smaller-bucket than 84% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSC8.3 | |
| Net Power | 224hp | 167.1kw |
| Gross Power | 240hp | 179kw |
| Power Measured @ | 1500rpm | |
| Max Torque | 764lb ft | 1035.9Nm |
| Displacement | 504cu in | 8.3L |
| Torque Measured @ | 2200rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 46275lb | 20990kg |
|---|---|---|
| Fuel Capacity | 79.3gal | 300L |
| Hydraulic System Fluid Capacity | 55.5gal | 210L |
| Engine Oil Fluid Capacity | 8gal | 30L |
| Cooling System Fluid Capacity | 15.9gal | 60L |
| Transmission Fluid Capacity | 14.1gal | 53L |
| Front Axle/Diff Fluid Capacity | 19.6gal | 74L |
| Rear Axle/Diff Fluid Capacity | 21.2gal | 80L |
| Static Tipping Weight | 35252lb | 15990.1kg |
| Turning Radius | 21.8ft in | 6635mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 26.5x25-20PR (L-3) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.2mph | 35.8km/h |
| Max Speed - Reverse | 22.7mph | 36.6km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 20.1gal/min | 76.1L/min |
| Raise Time | 6.3sec | |
| Dump Time | 1.3sec | |
| Lower Time | 4.2sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.47ft in | 3190mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.84yd3 | 3.7m3 |
| Bucket Capacity - Struck | 4.32yd3 | 3.3m3 |
| Bucket Width | 10.18ft in | 3100mm |
| Breakout Force | 40680lb | 180.96kN |
06 Dimensions Dimensions
| Ground Clearance | 1.71ft in | 520mm |
|---|---|---|
| Length With Bucket On Ground | 26.73ft in | 8145mm |
| Width Over Tires | 9.62ft in | 2930mm |
| Height To Top Of Cab | 11.6ft in | 3535mm |
| Wheelbase | 10.83ft in | 3300mm |
| Hinge Pin - Max Height | 14.15ft in | 4310mm |
| Reach At Max Lift And Dump | 3.37ft in | 1025mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.