Specification sheet Wheel Loader Ref kawasaki-85ziv-2-wheel-loader
Kawasaki 85ZIV-2
The Kawasaki 85ZIV-2 is a wheel loader with an operating weight of 43,761.76 lb (19,850 kg), a 226 hp engine, and a 4.32 yd³ (3.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
43,761.76lb
19,850kg
Engine power
226hp
168.6kW
Net Power Bucket capacity
4.32yd³
3.3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Kawasaki 85ZIV-2 sits at the heavy end of its class:
- Operating weight 43,760 lb heavier than 97% (n=439)
- Engine power 226 hp more powerful than 93% (n=408)
- Bucket capacity 4.3 yd³ larger-bucket than 87% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | M11-C | |
| Net Power | 226hp | 168.6kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 723lb ft | 980.3Nm |
| Displacement | 660cu in | 10.9L |
| Torque Measured @ | 1300rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 43761.8lb | 19850kg |
|---|---|---|
| Fuel Capacity | 79.3gal | 300L |
| Hydraulic System Fluid Capacity | 55.5gal | 210L |
| Engine Oil Fluid Capacity | 9.8gal | 37L |
| Cooling System Fluid Capacity | 14.8gal | 56L |
| Transmission Fluid Capacity | 14.1gal | 53L |
| Front Axle/Diff Fluid Capacity | 19.9gal | 75L |
| Rear Axle/Diff Fluid Capacity | 21.2gal | 80L |
| Static Tipping Weight | 31989.1lb | 14510kg |
| Turning Radius | 21.8ft in | 6635mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 26.5x25-20PR (L-3) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.1mph | 34km/h |
| Max Speed - Reverse | 21.6mph | 34.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 21.1gal/min | 79.9L/min |
| Raise Time | 6.3sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.5sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.85ft in | 3000mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.32yd3 | 3.3m3 |
| Bucket Capacity - Struck | 3.67yd3 | 2.8m3 |
| Bucket Width | 10.18ft in | 3100mm |
| Breakout Force | 41225lb | 183.38kN |
06 Dimensions Dimensions
| Ground Clearance | 1.71ft in | 520mm |
|---|---|---|
| Length With Bucket On Ground | 26.28ft in | 8010mm |
| Width Over Tires | 9.62ft in | 2930mm |
| Height To Top Of Cab | 11.6ft in | 3535mm |
| Wheelbase | 10.83ft in | 3300mm |
| Hinge Pin - Max Height | 13.54ft in | 4125mm |
| Reach At Max Lift And Dump | 3.6ft in | 1095mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.