Specification sheet Wheel Loader Ref kawasaki-85zii-wheel-loader
Kawasaki 85ZII
The Kawasaki 85ZII is a wheel loader with an operating weight of 43,871.99 lb (19,900 kg), a 226 hp engine, and a 4.26 yd³ (3.25 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
43,871.99lb
19,900kg
Engine power
226hp
168.53kW
Gross Power Bucket capacity
4.26yd³
3.25m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Kawasaki 85ZII sits at the heavy end of its class:
- Operating weight 43,870 lb heavier than 97% (n=439)
- Engine power 226 hp more powerful than 93% (n=408)
- Bucket capacity 4.3 yd³ larger-bucket than 86% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | LT-10-C250 | |
| Gross Power | 226hp | 168.6kw |
| Power Measured @ | 2100rpm | |
| Displacement | 611cu in | 10.1L |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 43872lb | 19900kg |
|---|---|---|
| Fuel Capacity | 76.7gal | 290L |
| Hydraulic System Fluid Capacity | 67.1gal | 254L |
| Engine Oil Fluid Capacity | 9.8gal | 37L |
| Cooling System Fluid Capacity | 17.5gal | 66L |
| Transmission Fluid Capacity | 15.9gal | 60L |
| Front Axle/Diff Fluid Capacity | 14.6gal | 55L |
| Rear Axle/Diff Fluid Capacity | 14.6gal | 55L |
| Static Tipping Weight | 29970lb | 13594.2kg |
| Turning Radius | 23.5ft in | 7150mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 23.5-25-16PR (L-2) |
03 Transmission Specification
| Transmission Type | full power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 22.5mph | 36.3km/h |
| Max Speed - Reverse | 9.7mph | 15.7km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2630psi | 18133.2kPa |
|---|---|---|
| Pump Flow Capacity | 55.7gal/min | 210.9L/min |
| Raise Time | 6.3sec | |
| Dump Time | 1.2sec | |
| Lower Time | 4sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.65ft in | 2940mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.26yd3 | 3.25m3 |
| Bucket Capacity - Struck | 3.67yd3 | 2.8m3 |
| Bucket Width | 9.69ft in | 2953mm |
| Breakout Force | 37080lb | 164.95kN |
06 Dimensions Dimensions
| Ground Clearance | 1.78ft in | 540mm |
|---|---|---|
| Length With Bucket On Ground | 25.05ft in | 7635mm |
| Width Over Tires | 9.68ft in | 2950mm |
| Height To Top Of Cab | 11.9ft in | 3625mm |
| Wheelbase | 10.5ft in | 3200mm |
| Hinge Pin - Max Height | 13.46ft in | 4102.61mm |
| Reach At Max Lift And Dump | 3.32ft in | 1010mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.