Specification sheet Wheel Loader Ref kawasaki-85za-wheel-loader
Kawasaki 85ZA
The Kawasaki 85ZA is a wheel loader with an operating weight of 43,651.53 lb (19,800 kg), a 216 hp engine, and a 4.98 yd³ (3.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
43,651.53lb
19,800kg
Engine power
216hp
161.1kW
Net Power Bucket capacity
4.98yd³
3.8m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Kawasaki 85ZA sits at the heavy end of its class:
- Operating weight 43,650 lb heavier than 97% (n=439)
- Engine power 216 hp more powerful than 87% (n=408)
- Bucket capacity 5 yd³ larger-bucket than 97% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2311 | |
|---|---|---|
| Engine Model | PE6T34 | |
| Net Power | 216hp | 161.1kw |
| Power Measured @ | 2200rpm | |
| Displacement | 712.2cu in | 11.7L |
| Aspiration | diesel w/ turbo |
02 Operational Specification
| Operating Weight | 43651.6lb | 19800kg |
|---|---|---|
| Turning Radius | 21.9ft in | 6650mm |
| Tire Size | 26.5-25-20PR(L3) |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.2mph | 34km/h |
| Max Speed - Reverse | 21.6mph | 34.7km/h |
04 Hydraulic System Specification
| Raise Time | 6.3sec | |
|---|---|---|
| Dump Time | 1.4sec | |
| Lower Time | 3.5sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.9ft in | 3015mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.98yd3 | 3.8m3 |
| Bucket Capacity - Struck | 4.32yd3 | 3.3m3 |
| Breakout Force | 4172.46lb | 18.56kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 26.28ft in | 8010mm |
|---|---|---|
| Height To Top Of Cab | 11.41ft in | 3475mm |
| Wheelbase | 10.83ft in | 3300mm |
| Reach At Max Lift And Dump | 3.76ft in | 1145mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.